[lkml]   [2016]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 4.8 00/10] 4.8.1-stable review
On Mon, Oct 10, 2016 at 09:11:23PM +0200, Mark Brown wrote:
> On Mon, Oct 10, 2016 at 05:54:22AM -0700, Guenter Roeck wrote:
> > Can I find the qemu command line somewhere ? The following work fine
> > for me.
> > Building arm:vexpress-a9:multi_v7_defconfig:vexpress-v2p-ca9 ... running ..... passed
> > Building arm:vexpress-a15:multi_v7_defconfig:vexpress-v2p-ca15-tc1 ... running ..... passed
> Note that most of the failures my lab saw are with extra configs, the
> only vanilla config that failed was vexpress-v2p-ca15_a7 with the
> multi_v7_defconfig.
> My connection doesn't have IPv6 and is a bit spotty right now so it's a
> bit difficult for me to check by lab but today's -next jobs are working
> for me as well... looking at the log for the failed stable boots:
> looks like it's some interaction with the test image causing udevadm
> settle to not run quickly enough - there's also a big delay before the
> UART comes up. I'm wondering if it's just that the host machine is just
> too slow here.

Can you send me (or point me to) the qemu command lines you are using ?
Even better would the complete setup describing how you connect to kernelci.


 \ /
  Last update: 2016-10-10 21:48    [W:0.187 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site