[lkml]   [2016]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/3] 8250: Split Fintek PCIE to UART to independent file
Fintek F81504/508/512 is a multi-functional PCIE device. It contains
GPIO and serial port with high baudrate & RTS auto direction for RS485.

The serial ports support from 50bps to 1.5Mbps with Linux baudrate
define excluding 1.0Mbps due to not support 16MHz clock source.

IC function list:
F81504: Max 2x8 GPIOs and max 4 serial ports
port2/3 are multi-function
F81508: Max 6x8 GPIOs and max 8 serial ports
port2/3 are multi-function, port8/9/10/11 are gpio only
F81512: Max 6x8 GPIOs and max 12 serial ports
port2/3/8/9/10/11 are multi-function

We'll spilt from 8250_pci.c to new file 8250_fintek_pci.c and make it
as a kernel module with first & second patch, implements GPIOLIB with
third patch.

Peter Hung (3):
serial: 8250_pci: Remove Fintek PCIE UART driver
8250_fintek_pci: Add Fintek PCIE UART driver
8250_fintek_pci: Add GPIOLIB support

drivers/tty/serial/8250/8250_fintek_pci.c | 767 ++++++++++++++++++++++++++++++
drivers/tty/serial/8250/8250_pci.c | 201 --------
drivers/tty/serial/8250/Kconfig | 9 +
drivers/tty/serial/8250/Makefile | 1 +
4 files changed, 777 insertions(+), 201 deletions(-)
create mode 100644 drivers/tty/serial/8250/8250_fintek_pci.c


 \ /
  Last update: 2016-01-19 04:21    [W:0.074 / U:2.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site