lkml.org 
[lkml]   [2016]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3 07/11] of: Add bindings of hw-trips for soctherm
Date
Add hw-trips sub-node for soctherm, which is
used to describe the hardware trip points for
each soctherm sensors.

Signed-off-by: Wei Ni <wni@nvidia.com>
---
.../devicetree/bindings/thermal/tegra-soctherm.txt | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)

diff --git a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt b/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt
index 6b68cd150405..75dc9dbe7e1a 100644
--- a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt
+++ b/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt
@@ -26,6 +26,15 @@ Required properties :
of this property. See <dt-bindings/thermal/tegra124-soctherm.h> for a
list of valid values when referring to thermal sensors.

+Optional properties:
+- hw-trip-points : A sub-node which is a container of hardware trip points
+ for each sensors.
+ * sensors: Sub-nodes which are used to describe the HW trip points info,
+ must be named as "cpu", "gpu", "mem", "pll".
+ Properties:
+ - thermtrip-temperature : Shutdown or reset temperature in millicelsius,
+ once the temperature of this sensor is higher than the
+ thermtrip-temperature, the system will be shutdown or reset.

Example :

@@ -40,6 +49,21 @@ Example :
reset-names = "soctherm";

#thermal-sensor-cells = <1>;
+
+ hw-trip-points {
+ cpu {
+ thermtrip-temperature = <103000>;
+ };
+ gpu {
+ thermtrip-temperature = <103500>;
+ };
+ mem {
+ thermtrip-temperature = <103500>;
+ };
+ pll {
+ thermtrip-temperature = <105000>;
+ };
+ };
};

Example: referring to thermal sensors :
--
1.9.1

\
 
 \ /
  Last update: 2016-01-18 11:41    [W:0.227 / U:3.952 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site