lkml.org 
[lkml]   [2016]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] mfd: arizona: Update binding docs for selecting mono/stereo outputs
On Mon, 14 Dec 2015, Charles Keepax wrote:

> Update the device tree binding documentation to include the wlf,out-mono
> property that is used to specify whether each output is a mono or stereo
> output.
>
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
>
> Changes since v1:
> - Clarify which outputs correspond to which entry in the out-mono list.
>
> Thanks,
> Charles
>
> Documentation/devicetree/bindings/mfd/arizona.txt | 6 ++++++
> 1 file changed, 6 insertions(+)

Applied, thanks.

> diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
> index 2b6ccdb..069e31d 100644
> --- a/Documentation/devicetree/bindings/mfd/arizona.txt
> +++ b/Documentation/devicetree/bindings/mfd/arizona.txt
> @@ -65,6 +65,12 @@ Optional properties:
> that have not been specified are set to 0 by default. Entries are:
> <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997)
> <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
> + - wlf,out-mono : A list of boolean values indicating whether each output is
> + mono or stereo. Position within the list indicates the output affected
> + (eg. First entry in the list corresponds to output 1). A non-zero value
> + indicates a mono output. If present, the number of values should be less
> + than or equal to the number of outputs, if less values are supplied the
> + additional outputs will be treated as stereo.
>
> - wlf,dmic-ref : DMIC reference voltage source for each input, can be
> selected from either MICVDD or one of the MICBIAS's, defines

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2016-01-11 09:21    [W:0.074 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site