lkml.org 
[lkml]   [2016]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 4/5] regulator: add regulator driver of hi655x pmic
Date
Add regulator support for hi655x pmic

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Fei Wang <w.f@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
---
drivers/regulator/Kconfig | 8 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/hi655x-regulator.c | 256 +++++++++++++++++++++++++++++++++++
3 files changed, 265 insertions(+)
create mode 100644 drivers/regulator/hi655x-regulator.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 8df0b0e..c00c915 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -261,6 +261,14 @@ config REGULATOR_HI6421
21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
of them come with support to either ECO (idle) or sleep mode.

+config REGULATOR_HI655X
+ tristate "Hisilicon HI655X PMIC regulators support"
+ depends on ARCH_HISI || (COMPILE_TEST && ARM64)
+ depends on MFD_HI655X_PMIC && OF
+ help
+ This driver provides support for the voltage regulators of the
+ Hisilicon Hi655x PMIC device.
+
config REGULATOR_ISL9305
tristate "Intersil ISL9305 regulator"
depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 0f81749..8e4db96 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o
+obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
diff --git a/drivers/regulator/hi655x-regulator.c b/drivers/regulator/hi655x-regulator.c
new file mode 100644
index 0000000..e8e9995
--- /dev/null
+++ b/drivers/regulator/hi655x-regulator.c
@@ -0,0 +1,256 @@
+/*
+ * Device driver for regulators in hi655x IC
+ *
+ * Copyright (c) 2016 Hisilicon.
+ *
+ * Chen Feng <puck.chen@hisilicon.com>
+ * Fei Wang <w.f@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/hi655x-pmic.h>
+
+struct hi655x_regulator {
+ unsigned int disable_reg;
+ unsigned int status_reg;
+ unsigned int ctrl_regs;
+ unsigned int ctrl_mask;
+ struct regulator_desc rdesc;
+};
+
+/* LDO7 & LDO10 */
+static const unsigned int ldo7_voltages[] = {
+ 1800000, 1850000, 2850000, 2900000,
+ 3000000, 3100000, 3200000, 3300000,
+};
+
+static const unsigned int ldo19_voltages[] = {
+ 1800000, 1850000, 1900000, 1750000,
+ 2800000, 2850000, 2900000, 3000000,
+};
+
+static const unsigned int ldo22_voltages[] = {
+ 900000, 1000000, 1050000, 1100000,
+ 1150000, 1175000, 1185000, 1200000,
+};
+
+enum hi655x_regulator_id {
+ HI655X_LDO0,
+ HI655X_LDO1,
+ HI655X_LDO2,
+ HI655X_LDO3,
+ HI655X_LDO4,
+ HI655X_LDO5,
+ HI655X_LDO6,
+ HI655X_LDO7,
+ HI655X_LDO8,
+ HI655X_LDO9,
+ HI655X_LDO10,
+ HI655X_LDO11,
+ HI655X_LDO12,
+ HI655X_LDO13,
+ HI655X_LDO14,
+ HI655X_LDO15,
+ HI655X_LDO16,
+ HI655X_LDO17,
+ HI655X_LDO18,
+ HI655X_LDO19,
+ HI655X_LDO20,
+ HI655X_LDO21,
+ HI655X_LDO22,
+};
+
+static int hi655x_is_enabled(struct regulator_dev *rdev)
+{
+ unsigned int value = 0;
+
+ struct hi655x_regulator *regulator = rdev_get_drvdata(rdev);
+
+ regmap_read(rdev->regmap, regulator->status_reg, &value);
+ return (value & BIT(regulator->ctrl_mask));
+}
+
+static int hi655x_disable(struct regulator_dev *rdev)
+{
+ int ret = 0;
+
+ struct hi655x_regulator *regulator = rdev_get_drvdata(rdev);
+
+ ret = regmap_write(rdev->regmap, regulator->disable_reg,
+ BIT(regulator->ctrl_mask));
+ return ret;
+}
+
+static struct regulator_ops hi655x_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = hi655x_disable,
+ .is_enabled = hi655x_is_enabled,
+ .list_voltage = regulator_list_voltage_table,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static struct regulator_ops hi655x_ldo_linear_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = hi655x_disable,
+ .is_enabled = hi655x_is_enabled,
+ .list_voltage = regulator_list_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+#define HI655X_LDO(_ID, vreg, vmask, ereg, dreg, \
+ sreg, cmask, vtable) { \
+ .rdesc = { \
+ .name = #_ID, \
+ .ops = &hi655x_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = HI655X_##_ID, \
+ .owner = THIS_MODULE, \
+ .n_voltages = ARRAY_SIZE(vtable), \
+ .volt_table = vtable, \
+ .vsel_reg = HI655X_BUS_ADDR(vreg), \
+ .vsel_mask = vmask, \
+ .enable_reg = HI655X_BUS_ADDR(ereg), \
+ .enable_mask = cmask, \
+ }, \
+ .disable_reg = HI655X_BUS_ADDR(dreg), \
+ .status_reg = HI655X_BUS_ADDR(sreg), \
+ .ctrl_mask = cmask, \
+}
+
+#define HI655X_LDO_LINEAR(_ID, vreg, vmask, ereg, dreg, \
+ sreg, cmask, minv, nvolt, vstep) { \
+ .rdesc = { \
+ .name = #_ID, \
+ .ops = &hi655x_ldo_linear_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = HI655X_##_ID, \
+ .owner = THIS_MODULE, \
+ .min_uV = minv, \
+ .n_voltages = nvolt, \
+ .uV_step = vstep, \
+ .uV_step = vstep, \
+ .vsel_reg = HI655X_BUS_ADDR(vreg), \
+ .vsel_mask = vmask, \
+ .enable_reg = HI655X_BUS_ADDR(ereg), \
+ .enable_mask = cmask, \
+ }, \
+ .disable_reg = HI655X_BUS_ADDR(dreg), \
+ .status_reg = HI655X_BUS_ADDR(sreg), \
+ .ctrl_mask = cmask, \
+}
+
+static struct hi655x_regulator regulators[] = {
+ HI655X_LDO_LINEAR(LDO2, 0x72, 0x07, 0x29, 0x2a, 0x2b, 0x01,
+ 2500000, 8, 100000),
+ HI655X_LDO(LDO7, 0x78, 0x07, 0x29, 0x2a, 0x2b, 0x06, ldo7_voltages),
+ HI655X_LDO(LDO10, 0x78, 0x07, 0x29, 0x2a, 0x2b, 0x01, ldo7_voltages),
+ HI655X_LDO_LINEAR(LDO13, 0x7e, 0x07, 0x2c, 0x2d, 0x2e, 0x04,
+ 1600000, 8, 50000),
+ HI655X_LDO_LINEAR(LDO14, 0x7f, 0x07, 0x2c, 0x2d, 0x2e, 0x05,
+ 2500000, 8, 100000),
+ HI655X_LDO_LINEAR(LDO15, 0x80, 0x07, 0x2c, 0x2d, 0x2e, 0x06,
+ 1600000, 8, 50000),
+ HI655X_LDO_LINEAR(LDO17, 0x82, 0x07, 0x2f, 0x30, 0x31, 0x00,
+ 2500000, 8, 100000),
+ HI655X_LDO(LDO19, 0x84, 0x07, 0x2f, 0x30, 0x31, 0x02, ldo19_voltages),
+ HI655X_LDO_LINEAR(LDO21, 0x86, 0x07, 0x2f, 0x30, 0x31, 0x04,
+ 1650000, 8, 50000),
+ HI655X_LDO(LDO22, 0x87, 0x07, 0x2f, 0x30, 0x31, 0x05, ldo22_voltages),
+};
+
+static struct of_regulator_match hi655x_regulator_match[] = {
+ { .name = "ldo2", .driver_data = (void *)HI655X_LDO0, },
+ { .name = "ldo7", .driver_data = (void *)HI655X_LDO7, },
+ { .name = "ldo10", .driver_data = (void *)HI655X_LDO10, },
+ { .name = "ldo13", .driver_data = (void *)HI655X_LDO13, },
+ { .name = "ldo14", .driver_data = (void *)HI655X_LDO14, },
+ { .name = "ldo15", .driver_data = (void *)HI655X_LDO15, },
+ { .name = "ldo17", .driver_data = (void *)HI655X_LDO17, },
+ { .name = "ldo19", .driver_data = (void *)HI655X_LDO19, },
+ { .name = "ldo21", .driver_data = (void *)HI655X_LDO21, },
+ { .name = "ldo22", .driver_data = (void *)HI655X_LDO22, },
+};
+
+static int hi655x_regulator_probe(struct platform_device *pdev)
+{
+ unsigned int i;
+ int ret;
+ struct hi655x_regulator *regulator;
+ struct hi655x_pmic *pmic;
+ struct regulator_config config = { };
+ struct device *dev = &pdev->dev;
+ struct regulator_dev *rdev;
+ struct device_node *np;
+
+ np = of_get_child_by_name(dev->parent->of_node, "regulators");
+ if (!np)
+ return -ENODEV;
+
+ ret = of_regulator_match(dev, np,
+ hi655x_regulator_match,
+ ARRAY_SIZE(hi655x_regulator_match));
+ of_node_put(np);
+ if (ret < 0) {
+ dev_err(dev, "Error parsing regulator init data: %d\n", ret);
+ return ret;
+ }
+
+ pmic = dev_get_drvdata(pdev->dev.parent);
+ if (!pmic) {
+ dev_err(dev, "no pmic in the regulator parent node\n");
+ return -ENODEV;
+ }
+
+ regulator = devm_kzalloc(dev, sizeof(*regulator), GFP_KERNEL);
+ if (!regulator)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, regulator);
+
+ for (i = 0; i < ARRAY_SIZE(regulators); i++) {
+ config.dev = &pdev->dev;
+ config.driver_data = regulator;
+ config.regmap = pmic->regmap;
+ config.of_node = hi655x_regulator_match[i].of_node;
+ config.init_data = hi655x_regulator_match[i].init_data;
+
+ /* register regulator with framework */
+ rdev = devm_regulator_register(&pdev->dev,
+ &regulators[i].rdesc,
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "failed to register regulator %s\n",
+ regulator->rdesc.name);
+ return PTR_ERR(rdev);
+ }
+ }
+ return 0;
+}
+
+static struct platform_driver hi655x_regulator_driver = {
+ .driver = {
+ .name = "hi655x-regulator",
+ },
+ .probe = hi655x_regulator_probe,
+};
+module_platform_driver(hi655x_regulator_driver);
+
+MODULE_AUTHOR("Chen Feng <puck.chen@hisilicon.com>");
+MODULE_DESCRIPTION("Hisilicon hi655x regulator driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
\
 
 \ /
  Last update: 2016-01-11 14:01    [W:0.118 / U:0.996 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site