[lkml]   [2015]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v5 0/6] bcm2835: auxiliar device support for spi
Alexander Stein <> writes:

> Hi,
> On Tuesday 08 September 2015 18:48:07, Eric Anholt wrote:
>> I finally had a chance to sit down and look at what the hardware's doing
>> with the enable bit (also, I've read a whole lot more of the hardware
>> now, so I'm a lot faster at answering questions like this). The enable
>> bits are a clock gate off of the VPU clock.
> Are any hardware documents about such things available (in public)?

Nope, I just went through the HDL to see how things were routed.

>> I knocked together the enable bits as a clock gate driver, since I'd
>> just written very similar code for the audio domain clock driver (and I
>> assume you are grumpy about how much time you've spent on this one
>> stupid register). It's up at
>> and I can submit
>> it if you like the result. I've compile tested it only, but I'm hoping
>> you could just drop your aux SPI driver on top of it and have things
>> work.
> IMHO line 45 ( should be like this
>> onecell->clks = kzalloc(sizeof(*onecell->clks) * BCM2835_AUX_CLOCK_COUNT, GFP_KERNEL);
> or you will only allocate a single struct clk*.

Thanks, that was a bug in my other clock driver, too!
[unhandled content-type:application/pgp-signature]
 \ /
  Last update: 2015-09-09 20:41    [W:0.073 / U:1.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site