lkml.org 
[lkml]   [2015]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH linux-next v6 2/8] mtd: spi-nor: remove unused read_xfer/write_xfer hooks
Date
struct spi_nor_xfer_cfg and read_xfer/write_xfer hooks were never used by
any driver. Do some cleanup by removing them.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
---
include/linux/mtd/spi-nor.h | 35 -----------------------------------
1 file changed, 35 deletions(-)

diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 66a5f144728a..08e405cbb6af 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -98,33 +98,6 @@ enum spi_protocol {
SPI_PROTO_4_4_4, /* Quad Command */
};

-/**
- * struct spi_nor_xfer_cfg - Structure for defining a Serial Flash transfer
- * @wren: command for "Write Enable", or 0x00 for not required
- * @cmd: command for operation
- * @cmd_pins: number of pins to send @cmd (1, 2, 4)
- * @addr: address for operation
- * @addr_pins: number of pins to send @addr (1, 2, 4)
- * @addr_width: number of address bytes
- * (3,4, or 0 for address not required)
- * @mode: mode data
- * @mode_pins: number of pins to send @mode (1, 2, 4)
- * @mode_cycles: number of mode cycles (0 for mode not required)
- * @dummy_cycles: number of dummy cycles (0 for dummy not required)
- */
-struct spi_nor_xfer_cfg {
- u8 wren;
- u8 cmd;
- u8 cmd_pins;
- u32 addr;
- u8 addr_pins;
- u8 addr_width;
- u8 mode;
- u8 mode_pins;
- u8 mode_cycles;
- u8 dummy_cycles;
-};
-
#define SPI_NOR_MAX_CMD_SIZE 8
enum spi_nor_ops {
SPI_NOR_OPS_READ = 0,
@@ -152,7 +125,6 @@ enum spi_nor_option_flags {
* @flash_read: the mode of the read
* @sst_write_second: used by the SST write operation
* @flags: flag options for the current SPI-NOR (SNOR_F_*)
- * @cfg: used by the read_xfer/write_xfer
* @erase_proto: the SPI protocol used by erase operations
* @read_proto: the SPI protocol used by read operations
* @write_proto: the SPI protocol used by write operations
@@ -162,8 +134,6 @@ enum spi_nor_option_flags {
* read/write/erase/lock/unlock operations
* @unprepare: [OPTIONAL] do some post work after the
* read/write/erase/lock/unlock operations
- * @read_xfer: [OPTIONAL] the read fundamental primitive
- * @write_xfer: [OPTIONAL] the writefundamental primitive
* @read_reg: [DRIVER-SPECIFIC] read out the register
* @write_reg: [DRIVER-SPECIFIC] write data to the register
* @read: [DRIVER-SPECIFIC] read data from the SPI NOR
@@ -191,15 +161,10 @@ struct spi_nor {
enum read_mode flash_read;
bool sst_write_second;
u32 flags;
- struct spi_nor_xfer_cfg cfg;
u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE];

int (*prepare)(struct spi_nor *nor, enum spi_nor_ops ops);
void (*unprepare)(struct spi_nor *nor, enum spi_nor_ops ops);
- int (*read_xfer)(struct spi_nor *nor, struct spi_nor_xfer_cfg *cfg,
- u8 *buf, size_t len);
- int (*write_xfer)(struct spi_nor *nor, struct spi_nor_xfer_cfg *cfg,
- u8 *buf, size_t len);
int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len);
int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len,
int write_enable);
--
1.8.2.2


\
 
 \ /
  Last update: 2015-09-09 15:41    [W:0.105 / U:4.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site