[lkml]   [2015]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v5 0/6] bcm2835: auxiliar device support for spi
On Tuesday 08 September 2015 18:48:07, Eric Anholt wrote:
> I finally had a chance to sit down and look at what the hardware's doing
> with the enable bit (also, I've read a whole lot more of the hardware
> now, so I'm a lot faster at answering questions like this). The enable
> bits are a clock gate off of the VPU clock.

Are any hardware documents about such things available (in public)?

> I knocked together the enable bits as a clock gate driver, since I'd
> just written very similar code for the audio domain clock driver (and I
> assume you are grumpy about how much time you've spent on this one
> stupid register). It's up at
> and I can submit
> it if you like the result. I've compile tested it only, but I'm hoping
> you could just drop your aux SPI driver on top of it and have things
> work.

IMHO line 45 ( should be like this
> onecell->clks = kzalloc(sizeof(*onecell->clks) * BCM2835_AUX_CLOCK_COUNT, GFP_KERNEL);
or you will only allocate a single struct clk*.

Best regards,

 \ /
  Last update: 2015-09-09 11:21    [W:0.100 / U:4.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site