lkml.org 
[lkml]   [2015]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v5 1/9] arm64: dts: exynos: Add dts files for 64-bit Exynos5433 SoC
From
Hi Mark,

On Thu, Mar 5, 2015 at 9:24 PM, Mark Rutland <mark.rutland@arm.com> wrote:
> On Thu, Mar 05, 2015 at 05:38:23AM +0000, Chanwoo Choi wrote:
>> This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on
>> Octal core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports
>> PSCI (Power State Coordination Interface) v0.1.
>>
>> This patch includes following dt node to support Exynos5433 SoC:
>> 1. Octa core for big.LITTLE architecture
>> - Cortex-A53 LITTLE Quad-core
>> - Cortex-A57 big Quad-core
>> - Support PSCI v0.1
>
> [...]
>
>> + psci {
>> + compatible = "arm,psci";
>> + method = "smc";
>> + cpu_off = <0x84000002>;
>> + cpu_on = <0xC4000003>;
>> + };
>
> Back at v2 you mentioned that CPU_OFF wasn't working [1].
>
> Do both CPU_ON and CPU_OFF work for all CPUs, including the boot CPU?

The CPU1 ~ CPU7 are well woking about CPU_ON/OFF.
CPU0 (boot CPU) is only well working for CPU_OFF.
But when I try to turn on the CPU0 after CPU_OFF, I failed it.

>
> I take it CPUs boot at EL2?
>
> [...]
>
>> + timer {
>> + compatible = "arm,armv8-timer";
>> + interrupts = <1 13 0xff04>,
>> + <1 14 0xff04>,
>> + <1 11 0xff04>,
>> + <1 10 0xff04>;
>> + };
>
> The timer node should be moved under the root node. It doesn't live on
> the bus; it's a component of the CPU.

OK. I'll move it according to your comment.

Thanks,
Chanwoo Choi


\
 
 \ /
  Last update: 2015-03-05 17:21    [W:1.127 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site