lkml.org 
[lkml]   [2015]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] net: fec: fix unbalanced clk disable on driver unbind
Date
When the driver is removed (e.g. using unbind through sysfs), the
clocks get disabled twice, once on fec_enet_close and once on
fec_drv_remove. Since the clocks are enabled only once, this leads
to a warning:

WARNING: CPU: 0 PID: 402 at drivers/clk/clk.c:992 clk_core_disable+0x64/0x68()

Remove the call to fec_enet_clk_enable in fec_drv_remove to balance
the clock enable/disable calls again. This has been introduce by
e8fcfcd5684a ("net: fec: optimize the clock management to save power").

Signed-off-by: Stefan Agner <stefan@agner.ch>
---
drivers/net/ethernet/freescale/fec_main.c | 1 -
1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 9bb6220..5fbdf72 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3383,7 +3383,6 @@ fec_drv_remove(struct platform_device *pdev)
regulator_disable(fep->reg_phy);
if (fep->ptp_clock)
ptp_clock_unregister(fep->ptp_clock);
- fec_enet_clk_enable(ndev, false);
of_node_put(fep->phy_node);
free_netdev(ndev);

--
2.3.0


\
 
 \ /
  Last update: 2015-03-05 15:21    [W:0.075 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site