lkml.org 
[lkml]   [2015]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/5] clocksource: sun5i: Switch to request_irq
Date
The current code uses setup_irq, while it could perfectly use the much simpler
request_irq. Switch to that.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clocksource/timer-sun5i.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c
index 02268448dc85..836f92ac0ffd 100644
--- a/drivers/clocksource/timer-sun5i.c
+++ b/drivers/clocksource/timer-sun5i.c
@@ -130,13 +130,6 @@ static irqreturn_t sun5i_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}

-static struct irqaction sun5i_timer_irq = {
- .name = "sun5i_timer0",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = sun5i_timer_interrupt,
- .dev_id = &sun5i_clockevent,
-};
-
static u64 sun5i_timer_sched_read(void)
{
return ~readl(timer_base + TIMER_CNTVAL_LO_REG(1));
@@ -178,7 +171,8 @@ static void __init sun5i_timer_init(struct device_node *node)

ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);

- ret = setup_irq(irq, &sun5i_timer_irq);
+ ret = request_irq(irq, sun5i_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+ "sun5i_timer0", &sun5i_clockevent);
if (ret)
pr_warn("failed to setup irq %d\n", irq);

--
2.3.0


\
 
 \ /
  Last update: 2015-03-05 11:41    [W:0.114 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site