lkml.org 
[lkml]   [2015]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 2/2] ARM: EXYNOS: Make sure that the Exynos5420 MDMA0 clock is enabled during suspend
Hi Javier,

On 03/27/2015 11:21 PM, Javier Martinez Canillas wrote:
> Commit ae43b3289186 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power
> Management support v12") added pm support for the pl330 dma driver but
> it makes the clock for the Exynos5420 MDMA0 DMA controller to be gated
> during suspend and this clock needs to remain enabled in order to make
> the system resume from a system suspend state.
>
> To make sure that the clock is enabled during suspend, enable it prior
> to entering a suspend state and disable it once the system has resumed.
>
> Thanks to Abhilash Kesavan for figuring out that this was the issue.
>
> Fixes: ae43b32 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12")
> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> ---
> arch/arm/mach-exynos/suspend.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
> index 1521eaf99265..6dbc0a6d1bb5 100644
> --- a/arch/arm/mach-exynos/suspend.c
> +++ b/arch/arm/mach-exynos/suspend.c
> @@ -16,6 +16,7 @@
> #include <linux/init.h>
> #include <linux/suspend.h>
> #include <linux/syscore_ops.h>
> +#include <linux/clk.h>
> #include <linux/cpu_pm.h>
> #include <linux/io.h>
> #include <linux/irq.h>
> @@ -79,6 +80,7 @@ static const struct exynos_pm_data *pm_data;
>
> static int exynos5420_cpu_state;
> static unsigned int exynos_pmu_spare3;
> +static struct clk *clk;
>
> /*
> * GIC wake-up support
> @@ -374,6 +376,16 @@ static void exynos5420_pm_prepare(void)
> {
> unsigned int tmp;
>
> + /*
> + * Exynos5420 requires the MDMA0 controller clock to be
> + * ungated on suspend in order to be resumed correctly.
> + */
> + clk = clk_get(NULL, "mdma0");
> + if (IS_ERR(clk))
> + pr_warn("Failed to get mdma0 clk (%ld)\n", PTR_ERR(clk));
> + else
> + clk_prepare_enable(clk);
> +

I faced on the similiar issue. If some clock was disabled,
Exynos SoC could not enter the suspend mode

But, I think it is not prpper method to resolve this issue.
about that that specific clock (e.g., mdma0) is handled in this dirver.
Also, ARM-64bit don't include any '../mach-exynos' directory.

IMHO, some clock issue have to be handled in SoC clk driver or others.

[snip]

Best Regards,
Chanwoo Choi


\
 
 \ /
  Last update: 2015-03-30 04:41    [W:0.074 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site