Messages in this thread |  | | Date | Thu, 5 Feb 2015 17:25:28 -0800 | From | Brian Norris <> | Subject | Re: [PATCH 5/9] mtd: pxa3xx_nand: add support for the Marvell Berlin nand controller |
| |
On Tue, Jan 27, 2015 at 11:42:08AM -0300, Ezequiel Garcia wrote: > On 01/27/2015 11:10 AM, Antoine Tenart wrote: > > --- a/drivers/mtd/nand/pxa3xx_nand.c > > +++ b/drivers/mtd/nand/pxa3xx_nand.c ... > > @@ -244,10 +254,13 @@ module_param(use_dma, bool, 0444); > > MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW"); > > > > static struct pxa3xx_nand_timing timing[] = { > > - { 40, 80, 60, 100, 80, 100, 90000, 400, 40, }, > > - { 10, 0, 20, 40, 30, 40, 11123, 110, 10, }, > > - { 10, 25, 15, 25, 15, 30, 25000, 60, 10, }, > > - { 10, 35, 15, 25, 15, 25, 25000, 60, 10, }, > > + { 40, 80, 60, 100, 80, 100, 90000, 400, 40, }, > > + { 10, 0, 20, 40, 30, 40, 11123, 110, 10, }, > > + { 10, 25, 15, 25, 15, 30, 25000, 60, 10, }, > > + { 10, 35, 15, 25, 15, 25, 25000, 60, 10, }, > > + { 5, 20, 10, 12, 10, 12, 60000, 60, 10, }, > > + { 5, 20, 10, 12, 10, 12, 200000, 120, 10, }, > > + { 5, 15, 10, 15, 10, 15, 60000, 60, 10, }, > > }; > > > > static struct pxa3xx_nand_flash builtin_flash_types[] = { > > @@ -260,6 +273,20 @@ static struct pxa3xx_nand_flash builtin_flash_types[] = { > > { "512MiB 8-bit", 0xdc2c, 64, 2048, 8, 8, 4096, &timing[2] }, > > { "512MiB 16-bit", 0xcc2c, 64, 2048, 16, 16, 4096, &timing[2] }, > > { "256MiB 16-bit", 0xba20, 64, 2048, 16, 16, 2048, &timing[3] }, > > +{ }, > > +}; > > + > > +static struct pxa3xx_nand_flash berlin_builtin_flash_types[] = { > > +{ "2GiB 8-bit", 0xd5ec, 128, 8192, 8, 8, 2048, &timing[4] }, > > +{ "2GiB 8-bit", 0xd598, 128, 8192, 8, 8, 2048, &timing[5] }, > > +{ "2GiB 8-bit", 0x482c, 256, 4096, 8, 8, 2048, &timing[6] }, > > +{ "4GiB 8-bit", 0xd7ec, 128, 8192, 8, 8, 4096, &timing[5] }, > > +{ "8GiB 8-bit", 0xdeec, 128, 8192, 8, 8, 4096, &timing[5] }, > > +{ "4GiB 8-bit", 0xd7ad, 256, 8192, 8, 8, 2048, &timing[5] }, > > +{ "4GiB 8-bit", 0x682c, 256, 4096, 8, 8, 4096, &timing[6] }, > > +{ "8GiB 8-bit", 0x882c, 256, 8192, 8, 8, 4096, &timing[6] }, > > +{ "8GiB 8-bit", 0xdead, 256, 8192, 8, 8, 4096, &timing[6] }, > > +{ }, > > }; > > > > IMO, this sucks. I was hoping to see this old style probing go away, > instead of be augmented. > > There are proper ways to set timings.
Agreed. I'm not taking any additions to this table. Please rewrite the code to use the onfi_async_timing_mode_to_sdr_timings() helpers.
Brian
|  |