lkml.org 
[lkml]   [2015]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 5/8] ARM: dts: Add properties to use pwm-fan device as a cooling device in Odroid U3
Hi Eduardo,

> On Wed, Feb 18, 2015 at 11:07:33AM +0100, Lukasz Majewski wrote:
> > With those bindings it is possible to use pwm-fan device available
> > in Odroid U3 as a cooling device.
> >
> > Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
> > ---
> > Changes for v2:
> > - Rename cooling-pwm-values property to cooling-levels
> > Changes for v3:
> > - Change patch's topic to "ARM dts"
> > - Reduce maximal cooling-level to 230 from 255
> > Changes for v4:
> > - None
> > ---
> > arch/arm/boot/dts/exynos4412-odroidu3.dts | 33
> > ++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1
> > deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts
> > b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 60bd1e4..3e5df3e
> > 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
> > +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
> > @@ -32,11 +32,42 @@
> > };
> > };
> >
> > - pwm-fan {
> > + fan0: pwm-fan {
> > compatible = "pwm-fan";
> > pwms = <&pwm 0 10000 0>;
> > + cooling-min-state = <0>;
> > + cooling-max-state = <3>;
> > + #cooling-cells = <2>;
> > + cooling-levels = <0 102 170 230>;
> > status = "okay";
> > };
> > +
> > + thermal-zones {
> > + cpu_thermal: cpu-thermal {
>
>
> This thermal zone misses the mandatory properties as per
> Documentation/devicetree/bindings/thermal/thermal.txt

Following mandatory properties:
thermal-sensors = <&tmu 0>;
polling-delay-passive = <0>;
polling-delay = <0>;
trips {

}

are defined in exynos4-cpu-thermal.dtsi included by this file.

In this patch only device dependent changes are stated.

>
> > + cooling-maps {
> > + map0 {
> > + trip = <&cpu_alert1>;
> > + cooling-device = <&cpu0 7 7>;
> > + };
> > + map1 {
> > + trip = <&cpu_alert2>;
> > + cooling-device = <&cpu0 13
> > 13>;
> > + };
> > + map2 {
> > + trip = <&cpu_alert0>;
> > + cooling-device = <&fan0 0 1>;
> > + };
> > + map3 {
> > + trip = <&cpu_alert1>;
> > + cooling-device = <&fan0 1 2>;
> > + };
> > + map4 {
> > + trip = <&cpu_alert2>;
> > + cooling-device = <&fan0 2 3>;
> > + };
> > + };
> > + };
> > + };
> > };
> >
> > &pwm {
> > --
> > 2.0.0.rc2
> >



--
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group


\
 
 \ /
  Last update: 2015-02-25 14:41    [W:0.071 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site