lkml.org 
[lkml]   [2015]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/8] ARM: dts: dove: Add node labels for PCIe ports 0 and 1
Hi Sebastian,


On 17/02/2015 19:52, Sebastian Hesselbarth wrote:
> Add pcie[01] node labels to allow to reference them easily from
> board level.
>
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>


Thanks,

Gregory

> ---
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Gregory Clement <gregory.clement@free-electrons.com>
> Cc: Gabriel Dobato <dobatog@gmail.com>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> ---
> arch/arm/boot/dts/dove.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
> index cae865435762..81209bd9525a 100644
> --- a/arch/arm/boot/dts/dove.dtsi
> +++ b/arch/arm/boot/dts/dove.dtsi
> @@ -64,7 +64,7 @@
> 0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 Mem */
> 0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
>
> - pcie-port@0 {
> + pcie0: pcie-port@0 {
> device_type = "pci";
> status = "disabled";
> assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
> @@ -82,7 +82,7 @@
> interrupt-map = <0 0 0 0 &intc 16>;
> };
>
> - pcie-port@1 {
> + pcie1: pcie-port@1 {
> device_type = "pci";
> status = "disabled";
> assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
>


--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com


\
 
 \ /
  Last update: 2015-02-23 16:01    [W:0.166 / U:2.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site