[lkml]   [2015]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
SubjectApplied "regulator: lm363x: add LM363x regulator binding information" to the regulator tree
The patch

regulator: lm363x: add LM363x regulator binding information

has been applied to the regulator tree at


All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.


From eaea7d27129b9b493c3029608486c157827a92ce Mon Sep 17 00:00:00 2001
From: Milo Kim <>
Date: Thu, 26 Nov 2015 15:57:00 +0900
Subject: [PATCH] regulator: lm363x: add LM363x regulator binding information

This binding describes LM3631 and LM3632 regulator properties.

Signed-off-by: Milo Kim <>
Signed-off-by: Mark Brown <>
.../bindings/regulator/lm363x-regulator.txt | 34 ++++++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/lm363x-regulator.txt

diff --git a/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt b/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt
new file mode 100644
index 000000000000..8f14df9d1205
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt
@@ -0,0 +1,34 @@
+TI LMU LM363x regulator device tree bindings
+LM363x regulator driver supports LM3631 and LM3632.
+LM3631 has five regulators and LM3632 supports three regulators.
+Required property:
+ - compatible: "ti,lm363x-regulator"
+Optional properties:
+ LM3632 has external enable pins for two LDOs.
+ - ti,lcm-en1-gpio: A GPIO specifier for Vpos control pin.
+ - ti,lcm-en2-gpio: A GPIO specifier for Vneg control pin.
+Child nodes:
+ LM3631
+ - vboost
+ - vcont
+ - voref
+ - vpos
+ - vneg
+ LM3632
+ - vboost
+ - vpos
+ - vneg
+ Optional properties of a child node:
+ Each sub-node should contain the constraints and initialization.
+ Please refer to [1].
+Examples: Please refer to ti-lmu dt-bindings [2].
+[1] ../regulator/regulator.txt
+[2] ../mfd/ti-lmu.txt

 \ /
  Last update: 2015-11-27 14:21    [W:0.296 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site