lkml.org 
[lkml]   [2015]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] leds: add DT binding for Qualcomm PM8941 WLED block
Date
From: Courtney Cavin <courtney.cavin@sonymobile.com>

This adds device tree binding documentation for the WLED ('White' LED)
block on Qualcomm's PM8941 PMICs.

Signed-off-by: Courtney Cavin <courtney.cavin@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
.../devicetree/bindings/leds/leds-pm8941-wled.txt | 43 ++++++++++++++++++++++
1 file changed, 43 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt b/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt
new file mode 100644
index 0000000..a85a964
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt
@@ -0,0 +1,43 @@
+Binding for Qualcomm PM8941 WLED driver
+
+Required properties:
+- compatible: should be "qcom,pm8941-wled"
+- reg: slave address
+
+Optional properties:
+- label: The label for this led
+ See Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger: Default trigger assigned to the LED
+ See Documentation/devicetree/bindings/leds/common.txt
+- qcom,cs-out: bool; enable current sink output
+- qcom,cabc: bool; enable content adaptive backlight control
+- qcom,ext-gen: bool; use externally generated modulator signal to dim
+- qcom,current-limit: mA; per-string current limit; value from 0 to 25
+ default: 20mA
+- qcom,current-boost-limit: mA; boost current limit; one of:
+ 105, 385, 525, 805, 980, 1260, 1400, 1680
+ default: 805mA
+- qcom,switching-freq: kHz; switching frequency; one of:
+ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371,
+ 1600, 1920, 2400, 3200, 4800, 9600,
+ default: 1600kHz
+- qcom,ovp: V; Over-voltage protection limit; one of:
+ 27, 29, 32, 35
+ default: 29V
+- qcom,num-strings: #; number of led strings attached; value from 1 to 3
+ default: 2
+
+Example:
+
+pm8941-wled@d800 {
+ compatible = "qcom,pm8941-wled";
+ reg = <0xd800>;
+ label = "backlight";
+
+ qcom,cs-out;
+ qcom,current-limit = <20>;
+ qcom,current-boost-limit = <805>;
+ qcom,switching-freq = <1600>;
+ qcom,ovp = <29>;
+ qcom,num-strings = <2>;
+};
--
1.9.1


\
 
 \ /
  Last update: 2015-01-24 02:01    [W:0.112 / U:1.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site