lkml.org 
[lkml]   [2014]   [Dec]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] serial: mcf: Remove unused variables
Date
'pp' is unused in mcf_set_termios() and mcf_config_rs485().

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
drivers/tty/serial/mcf.c | 2 --
1 file changed, 2 deletions(-)

diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index 1049667..1ca67d0 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -198,7 +198,6 @@ static void mcf_shutdown(struct uart_port *port)
static void mcf_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
- struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
unsigned long flags;
unsigned int baud, baudclk;
#if defined(CONFIG_M5272)
@@ -441,7 +440,6 @@ static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser)
/* Enable or disable the RS485 support */
static int mcf_config_rs485(struct uart_port *port, struct serial_rs485 *rs485)
{
- struct mcf_uart *pp = container_of(port, struct mcf_uart, port);
unsigned char mr1, mr2;

/* Get mode registers */
--
2.2.1


\
 
 \ /
  Last update: 2014-12-30 14:41    [W:0.024 / U:0.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site