lkml.org 
[lkml]   [2014]   [Dec]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/4] ath10k: fixup wait_for_completion_timeout return handling
Date
wait_for_completion_timeout does not return negative values so
"ret" handling here should check for timeout only.

patch was only compile tested for x86_64_defconfig + CONFIG_ATH10K=m

patch is against linux-next 3.19.0-rc1 -next-20141226

Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
---
drivers/net/wireless/ath/ath10k/htc.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c
index f1946a6..2fd9e18 100644
--- a/drivers/net/wireless/ath/ath10k/htc.c
+++ b/drivers/net/wireless/ath/ath10k/htc.c
@@ -703,11 +703,9 @@ int ath10k_htc_connect_service(struct ath10k_htc *htc,
/* wait for response */
status = wait_for_completion_timeout(&htc->ctl_resp,
ATH10K_HTC_CONN_SVC_TIMEOUT_HZ);
- if (status <= 0) {
- if (status == 0)
- status = -ETIMEDOUT;
+ if (status == 0) {
ath10k_err(ar, "Service connect timeout: %d\n", status);
- return status;
+ return -ETIMEDOUT;
}

/* we controlled the buffer creation, it's aligned */
--
1.7.10.4


\
 
 \ /
  Last update: 2014-12-30 13:41    [W:0.055 / U:3.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site