lkml.org 
[lkml]   [2014]   [Dec]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 3/3] pwm: core: Set enable state properly on failed call to enable
Date
The pwm_enable function didn't clear the enabled bit if a call to a
clients enable function returned an error. The result was that the state
of the pwm core was wrong. Clearing the bit when enable returns an error
ensures the state is properly set.

Signed-off-by: Jonathan Richardson <jonathar@broadcom.com>
---
drivers/pwm/core.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 966497d..641f6ec 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -457,8 +457,14 @@ EXPORT_SYMBOL_GPL(pwm_set_polarity);
*/
int pwm_enable(struct pwm_device *pwm)
{
- if (pwm && !test_and_set_bit(PWMF_ENABLED, &pwm->flags))
- return pwm->chip->ops->enable(pwm->chip, pwm);
+ int err;
+
+ if (pwm && !test_and_set_bit(PWMF_ENABLED, &pwm->flags)) {
+ err = pwm->chip->ops->enable(pwm->chip, pwm);
+ if (err)
+ clear_bit(PWMF_ENABLED, &pwm->flags);
+ return err;
+ }

return pwm ? 0 : -EINVAL;
}
--
1.7.9.5


\
 
 \ /
  Last update: 2014-12-31 00:01    [W:0.048 / U:2.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site