lkml.org 
[lkml]   [2014]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: v3.19-rc2: crashes during boot (syslog-ng, rpcbind ...)
On 12/29/2014 08:41 PM, Paul Moore wrote:
> To help verify that I'm heading down the right path, could you share your
> audit configuration as well? If that's not possible, can you at least confirm
> that you using a few audit directory watches?

Well, it is just a victim system for trinity - but I did not configured auditd in a special manner - so it is just the plain default configuration of Gentoo:

n22kvm-clone audit # wc *
26 201 1127 audit.rules
13 85 573 audit.rules.stop.post
16 81 547 audit.rules.stop.pre
32 95 701 auditd.conf
87 462 2948 total
n22kvm-clone audit # tail -n 40 -v *
==> audit.rules <==
# Copyright 1999-2011 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/sys-process/audit/files/audit.rules-2.1.3,v 1.1 2011/09/11 02:58:55 robbat2 Exp $
#
# This file contains the auditctl rules that are loaded
# whenever the audit daemon is started via the initscripts.
# The rules are simply the parameters that would be passed
# to auditctl.

# First rule - delete all
# This is to clear out old rules, so we don't append to them.
-D

# Feel free to add below this line. See auditctl man page

# The following rule would cause all of the syscalls listed to be ignored in logging.
-a exit,never -F arch=b32 -S read -S write -S open -S fstat -S mmap -S brk -S munmap -S nanosleep -S fcntl -S close -S dup2 -S rt_sigaction -S stat
#-a exit,never -F arch=b64 -S read -S write -S open -S fstat -S mmap -S brk -S munmap -S nanosleep -S fcntl -S close -S dup2 -S rt_sigaction -S stat

# The following rule would cause the capture of all systems not caught above.
# -a exit,always -S all

# Increase the buffers to survive stress events
-b 8192

# vim:ft=conf:

==> audit.rules.stop.post <==
# Copyright 1999-2005 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/sys-process/audit/files/audit.rules.stop.post,v 1.1 2006/06/22 07:41:46 robbat2 Exp $
#
# This file contains the auditctl rules that are loaded immediately after the
# audit deamon is stopped via the initscripts.
# The rules are simply the parameters that would be passed
# to auditctl.

# Not used for the default Gentoo configuration as of v1.2.3
# Paranoid security types might wish to reconfigure kauditd here.

# vim:ft=conf:

==> audit.rules.stop.pre <==
# Copyright 1999-2011 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/sys-process/audit/files/audit.rules.stop.pre,v 1.2 2011/09/11 02:58:55 robbat2 Exp $
#
# This file contains the auditctl rules that are loaded immediately before the
# audit deamon is stopped via the initscripts.
# The rules are simply the parameters that would be passed
# to auditctl.

# auditd is stopping, don't capture events anymore
-D

# Disable kernel generating audit events
-e 0

# vim:ft=conf:

==> auditd.conf <==
#
# This file controls the configuration of the audit daemon
#

log_file = /var/log/audit/audit.log
log_format = RAW
log_group = root
priority_boost = 4
flush = INCREMENTAL
freq = 20
num_logs = 5
disp_qos = lossy
dispatcher = /sbin/audispd
name_format = NONE
##name = mydomain
max_log_file = 6
max_log_file_action = ROTATE
space_left = 75
space_left_action = SYSLOG
action_mail_acct = root
admin_space_left = 50
admin_space_left_action = SUSPEND
disk_full_action = SUSPEND
disk_error_action = SUSPEND
##tcp_listen_port =
tcp_listen_queue = 5
tcp_max_per_addr = 1
##tcp_client_ports = 1024-65535
tcp_client_max_idle = 0
enable_krb5 = no
krb5_principal = auditd
##krb5_key_file = /etc/audit/audit.key



n22kvm-clone audit # cat /etc/conf.d/auditd
# Copyright 1999-2011 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/sys-process/audit/files/auditd-conf.d-2.1.3,v 1.1 2011/09/11 02:58:55 robbat2 Exp $

# Configuration options for auditd
# -f for foreground mode
# There are some other options as well, but you'll have to look in the source
# code to find them as they aren't ready for use yet.
EXTRAOPTIONS=''

# Audit rules file to run after starting auditd
RULEFILE_STARTUP=/etc/audit/audit.rules

# Audit rules file to run before and after stopping auditd
RULEFILE_STOP_PRE=/etc/audit/audit.rules.stop.pre
RULEFILE_STOP_POST=/etc/audit/audit.rules.stop.post

# If you want to enforce a certain locale for auditd,
# uncomment one of the next lines:
#AUDITD_LANG=none
AUDITD_LANG=C
#AUDITD_LANG=en_US
#AUDITD_LANG=en_US.UTF-8



--
Toralf
pgp key: 7B1A 07F4 EC82 0F90 D4C2 8936 872A E508 0076 E94E



\
 
 \ /
  Last update: 2014-12-29 21:41    [W:0.066 / U:1.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site