lkml.org 
[lkml]   [2014]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] comedi: checkpatch error/warning: spaces
Date
This patch will fix the following checkpatch errors/warnings in
drivers/staging/comedi/ which are brought by wrong spacing:
ERROR: trailing whitespace
ERROR: space prohibited before that ',' (ctx:WxW)
WARNING: please, no space before tabs

Signed-off-by: Andreas Siegling <andreas.siegling@fau.de>
Signed-off-by: Zhutao Lu <lvzhutao@gmail.com>
---
drivers/staging/comedi/drivers/daqboard2000.c | 2 +-
drivers/staging/comedi/drivers/das16m1.c | 2 +-
drivers/staging/comedi/drivers/ni_at_a2150.c | 2 +-
drivers/staging/comedi/drivers/ni_stc.h | 4 ++--
drivers/staging/comedi/drivers/s626.c | 2 +-
5 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
index 4172e99..c8daa47 100644
--- a/drivers/staging/comedi/drivers/daqboard2000.c
+++ b/drivers/staging/comedi/drivers/daqboard2000.c
@@ -40,7 +40,7 @@ Configuration options: not applicable, uses PCI auto config
for the card, and here are the findings so far.

1. A good document that describes the PCI interface chip is 9080db-106.pdf
- available from http://www.plxtech.com/products/io/pci9080
+ available from http://www.plxtech.com/products/io/pci9080

2. The initialization done so far is:
a. program the FPGA (windows code sans a lot of error messages)
diff --git a/drivers/staging/comedi/drivers/das16m1.c b/drivers/staging/comedi/drivers/das16m1.c
index 3895aa9..d8852c6 100644
--- a/drivers/staging/comedi/drivers/das16m1.c
+++ b/drivers/staging/comedi/drivers/das16m1.c
@@ -80,7 +80,7 @@ irq can be omitted, although the cmd interface will not work without it.
89ab 8254
cdef 8254
400 8255
- 404-407 8254
+ 404-407 8254

*/

diff --git a/drivers/staging/comedi/drivers/ni_at_a2150.c b/drivers/staging/comedi/drivers/ni_at_a2150.c
index 69e543a..bff4852 100644
--- a/drivers/staging/comedi/drivers/ni_at_a2150.c
+++ b/drivers/staging/comedi/drivers/ni_at_a2150.c
@@ -108,7 +108,7 @@ TRIG_WAKE_EOS
#define IRQ_LVL_BITS(x) (((x) & 0xf) << 4) /* sets irq level */
#define FIFO_INTR_EN_BIT 0x100 /* enable fifo interrupts */
#define FIFO_INTR_FHF_BIT 0x200 /* interrupt fifo half full */
-#define DMA_INTR_EN_BIT 0x800 /* enable interrupt on dma terminal count */
+#define DMA_INTR_EN_BIT 0x800 /* enable interrupt on dma terminal count */
#define DMA_DEM_EN_BIT 0x1000 /* enables demand mode dma */
#define I8253_BASE_REG 0x14
#define I8253_MODE_REG 0x17
diff --git a/drivers/staging/comedi/drivers/ni_stc.h b/drivers/staging/comedi/drivers/ni_stc.h
index bd69c3f..bb76fe1 100644
--- a/drivers/staging/comedi/drivers/ni_stc.h
+++ b/drivers/staging/comedi/drivers/ni_stc.h
@@ -166,7 +166,7 @@ enum Interrupt_B_Ack_Bits {
#define AI_SCAN_IN_PROG_Pulse _bit4
#define AI_EXTMUX_CLK_Pulse _bit3
#define AI_LOCALMUX_CLK_Pulse _bit2
-#define AI_SC_TC_Pulse _bit1
+#define AI_SC_TC_Pulse _bit1
#define AI_CONVERT_Pulse _bit0

#define AO_Command_1_Register 9
@@ -642,7 +642,7 @@ static unsigned AO_UPDATE_Output_Select(enum ao_update_output_selection
#define G_Load_Source_Select _bit7
#define G_Reload_Source_Switching _bit15
#define G_Loading_On_Gate _bit14
-#define G_Gate_Polarity _bit13
+#define G_Gate_Polarity _bit13

#define G_Counting_Once(a) (((a)&0x03)<<10)
#define G_Stop_Mode(a) (((a)&0x03)<<5)
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 14932c5..fc497dd 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -118,7 +118,7 @@ static void s626_mc_enable(struct comedi_device *dev,
static void s626_mc_disable(struct comedi_device *dev,
unsigned int cmd, unsigned int reg)
{
- writel(cmd << 16 , dev->mmio + reg);
+ writel(cmd << 16, dev->mmio + reg);
mmiowb();
}

--
1.9.1


\
 
 \ /
  Last update: 2014-12-28 20:01    [W:0.046 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site