lkml.org 
[lkml]   [2014]   [Dec]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCHv2] media: i2c/adp1653: devicetree support for adp1653
On Fri, Dec 26, 2014 at 2:33 PM, Pavel Machek <pavel@ucw.cz> wrote:
> Hi!
>
>> > We are moving to device tree support on OMAP3, but that currently
>> > breaks ADP1653 driver. This adds device tree support, plus required
>> > documentation.
>> >
>> > Signed-off-by: Pavel Machek <pavel@ucw.cz>
>> >
>> > ---
>> >
>> > Changed -microsec to -us, as requested by devicetree people.
>> >
>> > Fixed checkpatch issues.
>> >
>> > diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
>> > index 2d88816..2c6c7c5 100644
>> > --- a/Documentation/devicetree/bindings/leds/common.txt
>> > +++ b/Documentation/devicetree/bindings/leds/common.txt
>> > @@ -14,6 +14,15 @@ Optional properties for child nodes:
>> > "ide-disk" - LED indicates disk activity
>> > "timer" - LED flashes at a fixed, configurable rate
>> >
>> > +- max-microamp : maximum intensity in microamperes of the LED
>> > + (torch LED for flash devices)
>> > +- flash-max-microamp : maximum intensity in microamperes of the
>> > + flash LED; it is mandatory if the LED should
>> > + support the flash mode
>> > +- flash-timeout-microsec : timeout in microseconds after which the flash
>> > + LED is turned off
>>
>> Doesn't all this go in your flash led binding patch?
>
> No, I should not have included this part.
>
>> > +Example:
>> > +
>> > + adp1653: led-controller@30 {
>> > + compatible = "adi,adp1653";
>> > + reg = <0x30>;
>> > + gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
>> > +
>> > + flash {
>> > + flash-timeout-us = <500000>;
>> > + flash-max-microamp = <320000>;
>> > + max-microamp = <50000>;
>> > + };
>> > + indicator {
>>
>> These are different LEDs or different modes?
>
> flash & indicator are different LEDs. One is white, one is red. Flash
> can be used as a flash and as a torch.
>
>> > + max-microamp = <17500>;
>>
>> This is a bit inconsistent. The binding says this is for flash LEDs
>> torch mode, but I see no reason why it can't be common. Can you update
>> the binding doc to be clear here.
>
> By inconsisnent, you mean you want patch below?

Yes.

>> Also, aren't you missing label properties?
>
> label is optional, and as my driver does not yet use it, I forgot
> about it.

Based on your node names, there are obviously user defined functions
for them already. So they should have labels whether or not the driver
uses them.

Rob

> Signed-off-by: Pavel Machek <pavel@ucw.cz>
>
> index 2c6c7c5..92d4dac 100644
> --- a/Documentation/devicetree/bindings/leds/common.txt
> +++ b/Documentation/devicetree/bindings/leds/common.txt
> @@ -15,7 +15,6 @@ Optional properties for child nodes:
> "timer" - LED flashes at a fixed, configurable rate
>
> - max-microamp : maximum intensity in microamperes of the LED
> - (torch LED for flash devices)
> - flash-max-microamp : maximum intensity in microamperes of the
> flash LED; it is mandatory if the LED should
> support the flash mode
>
>
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html


\
 
 \ /
  Last update: 2014-12-26 22:21    [W:0.061 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site