lkml.org 
[lkml]   [2014]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 4/6] mmc: rtsx: add helper function to simplify code
Date
From: Micky Ching <micky_ching@realsil.com.cn>

To support sdio card, transfer mode need make a change,
this need to split code and use it in different place,
Add new function to simplify repeat operation.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
---
drivers/mmc/host/rtsx_pci_sdmmc.c | 95 +++++++++++++++++++++------------------
1 file changed, 51 insertions(+), 44 deletions(-)

diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index 90b7b6d..b96c9ed 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -99,6 +99,50 @@ static void sd_print_debug_regs(struct realtek_pci_sdmmc *host)
#define sd_print_debug_regs(host)
#endif /* DEBUG */

+static void sd_cmd_set_sd_cmd(struct rtsx_pcr *pcr, struct mmc_command *cmd)
+{
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD0, 0xFF,
+ SD_CMD_START | cmd->opcode);
+ rtsx_pci_write_be32(pcr, SD_CMD1, cmd->arg);
+}
+
+static void sd_cmd_set_data_len(struct rtsx_pcr *pcr, u16 blocks, u16 blksz)
+{
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, blocks);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, blocks >> 8);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, blksz);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_BYTE_CNT_H, 0xFF, blksz >> 8);
+}
+
+static int sd_response_type(struct mmc_command *cmd)
+{
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_NONE:
+ return SD_RSP_TYPE_R0;
+ case MMC_RSP_R1:
+ return SD_RSP_TYPE_R1;
+ case MMC_RSP_R1 & ~MMC_RSP_CRC:
+ return SD_RSP_TYPE_R1 | SD_NO_CHECK_CRC7;
+ case MMC_RSP_R1B:
+ return SD_RSP_TYPE_R1b;
+ case MMC_RSP_R2:
+ return SD_RSP_TYPE_R2;
+ case MMC_RSP_R3:
+ return SD_RSP_TYPE_R3;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int sd_status_index(int resp_type)
+{
+ if (resp_type == SD_RSP_TYPE_R0)
+ return 0;
+ else if (resp_type == SD_RSP_TYPE_R2)
+ return 16;
+
+ return 5;
+}
/*
* sd_pre_dma_transfer - do dma_map_sg() or using cookie
*
@@ -297,47 +341,18 @@ static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
int timeout = 100;
int i;
u8 *ptr;
- int stat_idx = 0;
- u8 rsp_type;
- int rsp_len = 5;
+ int rsp_type;
+ int stat_idx;
bool clock_toggled = false;

dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d, arg = 0x%08x\n",
__func__, cmd_idx, arg);

- /* Response type:
- * R0
- * R1, R5, R6, R7
- * R1b
- * R2
- * R3, R4
- */
- switch (mmc_resp_type(cmd)) {
- case MMC_RSP_NONE:
- rsp_type = SD_RSP_TYPE_R0;
- rsp_len = 0;
- break;
- case MMC_RSP_R1:
- rsp_type = SD_RSP_TYPE_R1;
- break;
- case MMC_RSP_R1 & ~MMC_RSP_CRC:
- rsp_type = SD_RSP_TYPE_R1 | SD_NO_CHECK_CRC7;
- break;
- case MMC_RSP_R1B:
- rsp_type = SD_RSP_TYPE_R1b;
- break;
- case MMC_RSP_R2:
- rsp_type = SD_RSP_TYPE_R2;
- rsp_len = 16;
- break;
- case MMC_RSP_R3:
- rsp_type = SD_RSP_TYPE_R3;
- break;
- default:
- dev_dbg(sdmmc_dev(host), "cmd->flag is not valid\n");
- err = -EINVAL;
+ rsp_type = sd_response_type(cmd);
+ if (rsp_type < 0)
goto out;
- }
+
+ stat_idx = sd_status_index(rsp_type);

if (rsp_type == SD_RSP_TYPE_R1b)
timeout = 3000;
@@ -352,13 +367,7 @@ static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
}

rtsx_pci_init_cmd(pcr);
-
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD0, 0xFF, 0x40 | cmd_idx);
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD1, 0xFF, (u8)(arg >> 24));
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD2, 0xFF, (u8)(arg >> 16));
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD3, 0xFF, (u8)(arg >> 8));
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CMD4, 0xFF, (u8)arg);
-
+ sd_cmd_set_sd_cmd(pcr, cmd);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG2, 0xFF, rsp_type);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_DATA_SOURCE,
0x01, PINGPONG_BUFFER);
@@ -372,12 +381,10 @@ static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
/* Read data from ping-pong buffer */
for (i = PPBUF_BASE2; i < PPBUF_BASE2 + 16; i++)
rtsx_pci_add_cmd(pcr, READ_REG_CMD, (u16)i, 0, 0);
- stat_idx = 16;
} else if (rsp_type != SD_RSP_TYPE_R0) {
/* Read data from SD_CMDx registers */
for (i = SD_CMD0; i <= SD_CMD4; i++)
rtsx_pci_add_cmd(pcr, READ_REG_CMD, (u16)i, 0, 0);
- stat_idx = 5;
}

rtsx_pci_add_cmd(pcr, READ_REG_CMD, SD_STAT1, 0, 0);
--
1.9.1


\
 
 \ /
  Last update: 2014-12-23 03:01    [W:0.075 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site