lkml.org 
[lkml]   [2014]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.19-rc1 v14 6/8] arm: netx: Migrate DEBUG_LL macros to shared directory
Date
As part of the migration we introduce DEBUG_UART_PHYS/DEBUG_UART_VIRT
which default to UART1 but allow a user to configure UART2 or UART3.
We also introduce symbolic names for the registers and flags.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
---
arch/arm/Kconfig.debug | 16 ++++++++++++++--
.../mach/debug-macro.S => include/debug/netx.S} | 22 +++++++++++-----------
2 files changed, 25 insertions(+), 13 deletions(-)
rename arch/arm/{mach-netx/include/mach/debug-macro.S => include/debug/netx.S} (62%)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index ec25d746b4dd..ff43ea38fe1f 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -503,6 +503,13 @@ choice
Say Y here if you want kernel low-level debugging support
on Vybrid based platforms.

+ config DEBUG_NETX_UART
+ bool "Kernel low-level debugging messages via NetX UART"
+ depends on ARCH_NETX
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Hilscher NetX based platforms.
+
config DEBUG_NOMADIK_UART
bool "Kernel low-level debugging messages via NOMADIK UART"
depends on ARCH_NOMADIK
@@ -1231,6 +1238,7 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX6SX_UART
default "debug/ks8695.S" if DEBUG_KS8695_UART
default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
+ default "debug/netx.S" if DEBUG_NETX_UART
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0
@@ -1276,6 +1284,7 @@ config DEBUG_UART_BCM63XX

config DEBUG_UART_PHYS
hex "Physical base address of debug UART"
+ default 0x00100a00 if DEBUG_NETX_UART
default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
default 0x01c28000 if DEBUG_SUNXI_UART0
default 0x01c28400 if DEBUG_SUNXI_UART1
@@ -1364,7 +1373,8 @@ config DEBUG_UART_PHYS
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_LL_UART_EFM32 || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
- DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
+ DEBUG_MSM_UART || DEBUG_NETX_UART || \
+ DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
@@ -1373,6 +1383,7 @@ config DEBUG_UART_PHYS

config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
+ default 0xe0000a00 if DEBUG_NETX_UART
default 0xe0010fe0 if ARCH_RPC
default 0xe1000000 if DEBUG_MSM_UART
default 0xf0000be0 if ARCH_EBSA110
@@ -1449,7 +1460,8 @@ config DEBUG_UART_VIRT
default DEBUG_UART_PHYS if !MMU
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
- DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
+ DEBUG_MSM_UART || DEBUG_NETX_UART || \
+ DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART

config DEBUG_UART_8250_SHIFT
diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/include/debug/netx.S
similarity index 62%
rename from arch/arm/mach-netx/include/mach/debug-macro.S
rename to arch/arm/include/debug/netx.S
index 247781e096e2..81e1b2af70f7 100644
--- a/arch/arm/mach-netx/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/netx.S
@@ -1,5 +1,4 @@
-/* arch/arm/mach-netx/include/mach/debug-macro.S
- *
+/*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
@@ -11,26 +10,27 @@
*
*/

-#include "hardware.h"
+#define UART_DATA 0
+#define UART_FLAG 0x18
+#define UART_FLAG_BUSY (1 << 3)

.macro addruart, rp, rv, tmp
- mov \rp, #0x00000a00
- orr \rv, \rp, #io_p2v(0x00100000) @ virtual
- orr \rp, \rp, #0x00100000 @ physical
+ ldr \rp, =CONFIG_DEBUG_UART_PHYS
+ ldr \rv, =CONFIG_DEBUG_UART_VIRT
.endm

.macro senduart,rd,rx
- str \rd, [\rx, #0]
+ str \rd, [\rx, #UART_DATA]
.endm

.macro busyuart,rd,rx
-1002: ldr \rd, [\rx, #0x18]
- tst \rd, #(1 << 3)
+1002: ldr \rd, [\rx, #UART_FLAG]
+ tst \rd, #UART_FLAG_BUSY
bne 1002b
.endm

.macro waituart,rd,rx
-1001: ldr \rd, [\rx, #0x18]
- tst \rd, #(1 << 3)
+1001: ldr \rd, [\rx, #UART_FLAG]
+ tst \rd, #UART_FLAG_BUSY
bne 1001b
.endm
--
1.9.3


\
 
 \ /
  Last update: 2014-12-22 18:41    [W:0.054 / U:1.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site