lkml.org 
[lkml]   [2014]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/1] ARM: dts: kirkwood: enable phy driver for SATA controller on 88f6192
On Tue, Dec 16, 2014 at 07:22:18PM +0100, Evgeni Dobrev wrote:
> This patch enables the phy drivers for the SATA controller on Marvell's 88f6192.
> Without them it is not possible to use SATA drives attached to this processor.
>
> Signed-off-by: Evgeni Dobrev <evgeni@studio-punkt.com>

Hi Evgeni

Added to mvebu/dt

Andrew

> ---
> arch/arm/boot/dts/kirkwood-6192.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi
> index dd81508..9e6e9e2 100644
> --- a/arch/arm/boot/dts/kirkwood-6192.dtsi
> +++ b/arch/arm/boot/dts/kirkwood-6192.dtsi
> @@ -66,6 +66,8 @@
> interrupts = <21>;
> clocks = <&gate_clk 14>, <&gate_clk 15>;
> clock-names = "0", "1";
> + phys = <&sata_phy0>, <&sata_phy1>;
> + phy-names = "port0", "port1";
> status = "disabled";
> };
>
> --
> 1.7.10.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel


\
 
 \ /
  Last update: 2014-12-21 14:01    [W:0.064 / U:0.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site