lkml.org 
[lkml]   [2014]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Staging: comedi: fix spacing issues in ni_stc.h
Date
Patch to the ni_stc.h file that removes spaces before tabs, and adds blank lines
after declarations.
Signed-off-by: Sage Vaillancourt <sagev9000@gmail.com>
---
drivers/staging/comedi/drivers/ni_stc.h | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/comedi/drivers/ni_stc.h b/drivers/staging/comedi/drivers/ni_stc.h
index bd69c3f..3b8b3c5 100644
--- a/drivers/staging/comedi/drivers/ni_stc.h
+++ b/drivers/staging/comedi/drivers/ni_stc.h
@@ -166,7 +166,7 @@ enum Interrupt_B_Ack_Bits {
#define AI_SCAN_IN_PROG_Pulse _bit4
#define AI_EXTMUX_CLK_Pulse _bit3
#define AI_LOCALMUX_CLK_Pulse _bit2
-#define AI_SC_TC_Pulse _bit1
+#define AI_SC_TC_Pulse _bit1
#define AI_CONVERT_Pulse _bit0

#define AO_Command_1_Register 9
@@ -326,6 +326,7 @@ static inline unsigned RTSI_Output_Bit(unsigned channel, int is_mseries)
{
unsigned max_channel;
unsigned base_bit_shift;
+
if (is_mseries) {
base_bit_shift = 8;
max_channel = 7;
@@ -642,7 +643,7 @@ static unsigned AO_UPDATE_Output_Select(enum ao_update_output_selection
#define G_Load_Source_Select _bit7
#define G_Reload_Source_Switching _bit15
#define G_Loading_On_Gate _bit14
-#define G_Gate_Polarity _bit13
+#define G_Gate_Polarity _bit13

#define G_Counting_Once(a) (((a)&0x03)<<10)
#define G_Stop_Mode(a) (((a)&0x03)<<5)
@@ -1142,6 +1143,7 @@ static inline unsigned MSeries_AI_Config_Bank_Bits(enum ni_reg_type reg_type,
unsigned channel)
{
unsigned bits = channel & 0x30;
+
if (reg_type == ni_reg_622x) {
if (channel & 0x40)
bits |= 0x400;
@@ -1191,6 +1193,7 @@ enum MSeries_PLL_Control_Bits {
static inline unsigned MSeries_PLL_Divisor_Bits(unsigned divisor)
{
static const unsigned max_divisor = 0x10;
+
if (divisor < 1 || divisor > max_divisor) {
pr_err("%s: bug, invalid divisor=%i\n", __func__, divisor);
return 0;
@@ -1201,6 +1204,7 @@ static inline unsigned MSeries_PLL_Divisor_Bits(unsigned divisor)
static inline unsigned MSeries_PLL_Multiplier_Bits(unsigned multiplier)
{
static const unsigned max_multiplier = 0x100;
+
if (multiplier < 1 || multiplier > max_multiplier) {
pr_err("%s: bug, invalid multiplier=%i\n", __func__,
multiplier);
--
2.2.0


\
 
 \ /
  Last update: 2014-12-21 03:41    [W:0.042 / U:1.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site