lkml.org 
[lkml]   [2014]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 2/4] fpga manager: add sysfs interface document
Date
From: Alan Tull <atull@opensource.altera.com>

Add documentation under drivers/staging for new fpga manager's
sysfs interface.

Signed-off-by: Alan Tull <atull@opensource.altera.com>
---
v5 : (actually second version, but keeping version numbers
aligned with rest of patch series)
Move document to drivers/staging/fpga/Documentation/ABI

v6 : No change in this patch for v6 of the patch set

v7 : No change in this patch for v7 of the patch set
---
.../Documentation/ABI/sysfs-class-fpga-manager | 38 ++++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 drivers/staging/fpga/Documentation/ABI/sysfs-class-fpga-manager

diff --git a/drivers/staging/fpga/Documentation/ABI/sysfs-class-fpga-manager b/drivers/staging/fpga/Documentation/ABI/sysfs-class-fpga-manager
new file mode 100644
index 0000000..eb600f2
--- /dev/null
+++ b/drivers/staging/fpga/Documentation/ABI/sysfs-class-fpga-manager
@@ -0,0 +1,38 @@
+What: /sys/class/fpga_manager/<fpga>/name
+Date: October 2014
+KernelVersion: 3.18
+Contact: Alan Tull <atull@opensource.altera.com>
+Description: Name of low level driver.
+
+What: /sys/class/fpga_manager/<fpga>/firmware
+Date: October 2014
+KernelVersion: 3.18
+Contact: Alan Tull <atull@opensource.altera.com>
+Description: Name of the FPGA image file to load using firmware class.
+
+What: /sys/class/fpga_manager/<fpga>/reset
+Date: October 2014
+KernelVersion: 3.18
+Contact: Alan Tull <atull@opensource.altera.com>
+Description: Write 1 to reset the FPGA
+
+What: /sys/class/fpga_manager/<fpga>/state
+Date: October 2014
+KernelVersion: 3.18
+Contact: Alan Tull <atull@opensource.altera.com>
+Description: Read state of fpga framework state machine as a string.
+ Valid states may vary by manufacturer; superset is:
+ * unknown = can't determine state
+ * power_off = FPGA power is off
+ * power_up = FPGA reports power is up
+ * reset = FPGA held in reset state
+ * firmware_request = firmware class request in progress
+ * firmware_request_err = firmware request failed
+ * write_init = FPGA being prepared for programming
+ * write_init_err = Error while preparing FPGA for
+ programming
+ * write = FPGA ready to receive image data
+ * write_err = Error while programming
+ * write_complete = Doing post programming steps
+ * write_complete_err = Error while doing post programming
+ * operating = FPGA is programmed and operating
--
1.7.9.5


\
 
 \ /
  Last update: 2014-12-19 18:21    [W:0.092 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site