lkml.org 
[lkml]   [2014]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] usb: dwc3: add Fujitsu Specific Glue layer
Date
This patch adds support for Synopsis DesignWare USB3 IP Core found
on Fujitsu Socs.

Signed-off-by: Sneeker Yeh <Sneeker.Yeh@tw.fujitsu.com>
---
.../devicetree/bindings/usb/fujitsu-dwc3.txt | 25 +++
drivers/usb/dwc3/Kconfig | 11 ++
drivers/usb/dwc3/Makefile | 1 +
drivers/usb/dwc3/dwc3-mb86s70.c | 194 ++++++++++++++++++++
4 files changed, 231 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/fujitsu-dwc3.txt
create mode 100644 drivers/usb/dwc3/dwc3-mb86s70.c

diff --git a/Documentation/devicetree/bindings/usb/fujitsu-dwc3.txt b/Documentation/devicetree/bindings/usb/fujitsu-dwc3.txt
new file mode 100644
index 0000000..df77f91
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/fujitsu-dwc3.txt
@@ -0,0 +1,25 @@
+FUJITSU GLUE COMPONENTS
+
+MB86S7x DWC3 GLUE
+ - compatible : Should be "fujitsu,mb86s70-dwc3"
+ - clocks: from common clock binding, handle to usb clock.
+ - clock-names: from common clock binding.
+ - #address-cells, #size-cells : Must be present if the device has sub-nodes
+ - ranges: the child address space are mapped 1:1 onto the parent address space
+ - #stream-id-cells : handle to use "arm,mmu-400" ARM IOMMU driver
+
+Sub-nodes:
+The dwc3 core should be added as subnode to MB86S7x dwc3 glue.
+- dwc3 :
+ The binding details of dwc3 can be found in:
+ Documentation/devicetree/bindings/usb/dwc3.txt
+
+usb3host: mb86s70_usb3host {
+ compatible = "fujitsu,mb86s70-dwc3";
+ clocks = <&clk_alw_1_1>;
+ clock-names = "bus_clk";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ #stream-id-cells = <0>;
+};
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 58b5b2c..3390d42 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -61,6 +61,17 @@ config USB_DWC3_EXYNOS
Recent Exynos5 SoCs ship with one DesignWare Core USB3 IP inside,
say 'Y' or 'M' if you have one such device.

+config USB_DWC3_MB86S70
+ tristate "MB86S70 Designware USB3 Platform code"
+ default USB_DWC3
+ help
+ MB86S7X SOC ship with DesignWare Core USB3 IP inside,
+ this implementation also integrated Fujitsu USB PHY inside
+ this Core USB3 IP.
+
+ say 'Y' or 'M' if you have one such device.
+
+
config USB_DWC3_PCI
tristate "PCIe-based Platforms"
depends on PCI
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index bb34fbc..05d1de2 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -38,3 +38,4 @@ obj-$(CONFIG_USB_DWC3_PCI) += dwc3-pci.o
obj-$(CONFIG_USB_DWC3_KEYSTONE) += dwc3-keystone.o
obj-$(CONFIG_USB_DWC3_QCOM) += dwc3-qcom.o
obj-$(CONFIG_USB_DWC3_ST) += dwc3-st.o
+obj-$(CONFIG_USB_DWC3_MB86S70) += dwc3-mb86s70.o
diff --git a/drivers/usb/dwc3/dwc3-mb86s70.c b/drivers/usb/dwc3/dwc3-mb86s70.c
new file mode 100644
index 0000000..241c5bd
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-mb86s70.c
@@ -0,0 +1,194 @@
+/**
+ * dwc3-mb86s70.c - Fujitsu mb86s70 DWC3 Specific Glue layer
+ *
+ * Copyright (c) 2013 - 2014 FUJITSU SEMICONDUCTOR LIMITED
+ * http://jp.fujitsu.com/group/fsl
+ *
+ * Author: Alice Chan <Alice.Chan@tw.fujitsu.com>
+ * based on dwc3-exynos.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+
+struct dwc3_mb86s70 {
+ struct device *dev;
+ struct clk **clk_table;
+};
+
+/* return 0 means successful */
+static int dwc3_mb86s70_clk_control(struct device *dev, bool on)
+{
+ int ret, i;
+ struct clk *clk;
+
+ if (!on)
+ goto clock_off;
+
+ for (i = 0;; i++) {
+ clk = of_clk_get(dev->of_node, i);
+ if (IS_ERR(clk))
+ break;
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ dev_err(dev, "failed to enable clock[%d]\n", i);
+ goto clock_off;
+ }
+ }
+
+ return 0;
+
+clock_off:
+ for (i = 0;; i++) {
+ clk = of_clk_get(dev->of_node, i);
+ if (IS_ERR(clk))
+ break;
+
+ clk_disable_unprepare(clk);
+ }
+
+ return on;
+}
+
+static int dwc3_mb86s70_remove_child(struct device *dev, void *unused)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ of_device_unregister(pdev);
+
+ return 0;
+}
+
+static u64 dwc3_mb86s70_dma_mask = DMA_BIT_MASK(32);
+
+static int dwc3_mb86s70_probe(struct platform_device *pdev)
+{
+ struct dwc3_mb86s70 *mb86s70;
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ int ret;
+
+ mb86s70 = devm_kzalloc(dev, sizeof(*mb86s70), GFP_KERNEL);
+ if (!mb86s70) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ dev->dma_mask = &dwc3_mb86s70_dma_mask;
+
+ platform_set_drvdata(pdev, mb86s70);
+
+ mb86s70->dev = dev;
+
+ /* resume driver for clock, power */
+ pm_runtime_enable(&pdev->dev);
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "get_sync failed with err %d\n", ret);
+ goto err;
+ }
+
+ if (node) {
+ ret = of_platform_populate(node, NULL, NULL, dev);
+ if (!ret)
+ return 0;
+ dev_err(dev, "failed to add dwc3 core\n");
+ }
+ dev_err(dev, "no device node, failed to add dwc3 core\n");
+ ret = -ENODEV;
+
+err:
+ return ret;
+}
+
+static int dwc3_mb86s70_remove(struct platform_device *pdev)
+{
+ device_for_each_child(&pdev->dev, NULL, dwc3_mb86s70_remove_child);
+
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static const struct of_device_id mb86s70_dwc3_match[] = {
+ { .compatible = "fujitsu,mb86s70-dwc3" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mb86s70_dwc3_match);
+
+#ifdef CONFIG_PM
+#ifdef CONFIG_PM_RUNTIME
+static int dwc3_mb86s70_runtime_suspend(struct device *dev)
+{
+ dwc3_mb86s70_clk_control(dev, false);
+
+ return 0;
+}
+
+static int dwc3_mb86s70_runtime_resume(struct device *dev)
+{
+ dwc3_mb86s70_clk_control(dev, true);
+
+ return 0;
+}
+#endif /* CONFIG_PM_RUNTIME */
+static int dwc3_mb86s70_suspend(struct device *dev)
+{
+ if (pm_runtime_status_suspended(dev))
+ return 0;
+
+ return dwc3_mb86s70_runtime_suspend(dev);
+}
+
+static int dwc3_mb86s70_resume(struct device *dev)
+{
+ if (pm_runtime_status_suspended(dev))
+ return 0;
+
+ return dwc3_mb86s70_runtime_resume(dev);
+}
+
+static const struct dev_pm_ops dwc3_mb86s70_dev_pm_ops = {
+ .suspend = dwc3_mb86s70_suspend,
+ .resume = dwc3_mb86s70_resume,
+ SET_RUNTIME_PM_OPS(
+ dwc3_mb86s70_runtime_suspend,
+ dwc3_mb86s70_runtime_resume, NULL)
+};
+
+#define DEV_PM_OPS (&dwc3_mb86s70_dev_pm_ops)
+#else
+#define DEV_PM_OPS NULL
+#endif /* CONFIG_PM_SLEEP */
+
+static struct platform_driver dwc3_mb86s70_driver = {
+ .probe = dwc3_mb86s70_probe,
+ .remove = dwc3_mb86s70_remove,
+ .driver = {
+ .name = "mb86s70-dwc3",
+ .of_match_table = of_match_ptr(mb86s70_dwc3_match),
+ .pm = DEV_PM_OPS,
+ },
+};
+
+module_platform_driver(dwc3_mb86s70_driver);
+
+MODULE_ALIAS("platform:mb86s70-dwc3");
+MODULE_AUTHOR("Alice Chan <Alice.Chan@tw.fujitsu.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("DesignWare USB3 mb86s70 Glue Layer");
--
1.7.9.5


\
 
 \ /
  Last update: 2014-12-16 03:41    [W:0.123 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site