lkml.org 
[lkml]   [2014]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] usb: host: f_usb20ho: add support for Fujitsu ehci/ohci USB 2.0 host controller
Date
This patch adds support for EHCI compliant Host controller found
on Fujitsu Socs.

Signed-off-by: Sneeker Yeh <Sneeker.Yeh@tw.fujitsu.com>
---
.../devicetree/bindings/usb/fujitsu-ehci.txt | 22 ++
drivers/usb/host/Kconfig | 11 +
drivers/usb/host/Makefile | 1 +
drivers/usb/host/f_usb20ho_hcd.c | 306 ++++++++++++++++++++
drivers/usb/host/f_usb20ho_hcd.h | 35 +++
5 files changed, 375 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/fujitsu-ehci.txt
create mode 100644 drivers/usb/host/f_usb20ho_hcd.c
create mode 100644 drivers/usb/host/f_usb20ho_hcd.h

diff --git a/Documentation/devicetree/bindings/usb/fujitsu-ehci.txt b/Documentation/devicetree/bindings/usb/fujitsu-ehci.txt
new file mode 100644
index 0000000..e180860
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/fujitsu-ehci.txt
@@ -0,0 +1,22 @@
+FUJITSU GLUE COMPONENTS
+
+MB86S7x EHCI GLUE
+ - compatible : Should be "fujitsu,f_usb20ho_hcd"
+ - reg : Address and length of the register set for the device.
+ - interrupts : The irq number of this device that is used to interrupt the
+ CPU
+ - clocks: from common clock binding, handle to usb clock.
+ - clock-names: from common clock binding.
+ - #stream-id-cells : handle to use "arm,mmu-400" ARM IOMMU driver
+ - fujitsu,power-domain : pd_usb2h node has to be builded, details can be
+ found in:
+ Documentation/devicetree/bindings/
+
+hcd21: f_usb20ho_hcd {
+ compatible = "fujitsu,f_usb20ho_hcd";
+ reg = <0 0x34200000 0x80000>;
+ interrupts = <0 419 0x4>;
+ clocks = <&clk_main_2_4>, <&clk_main_4_5>, <&clk_usb_0_0>;
+ clock-names = "h_clk", "p_clk", "p_cryclk";
+ #stream-id-cells = <0>;
+};
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index fafc628..9482140 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -786,6 +786,17 @@ config USB_HCD_SSB

If unsure, say N.

+config USB_F_USB20HO_HCD
+ tristate "F_USB20HO USB Host Controller"
+ depends on USB && ARCH_MB86S7X
+ default y
+ help
+ This driver enables support for USB20HO USB Host Controller,
+ the driver supports High, Full and Low Speed USB.
+
+ To compile this driver a module, choose M here: the module
+ will be called "f_usb20ho-hcd".
+
config USB_HCD_TEST_MODE
bool "HCD test mode support"
---help---
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index d6216a4..b89e536 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -78,3 +78,4 @@ obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o
obj-$(CONFIG_USB_FUSBH200_HCD) += fusbh200-hcd.o
obj-$(CONFIG_USB_FOTG210_HCD) += fotg210-hcd.o
obj-$(CONFIG_USB_MAX3421_HCD) += max3421-hcd.o
+obj-$(CONFIG_USB_F_USB20HO_HCD)+= f_usb20ho_hcd.o
diff --git a/drivers/usb/host/f_usb20ho_hcd.c b/drivers/usb/host/f_usb20ho_hcd.c
new file mode 100644
index 0000000..d665487
--- /dev/null
+++ b/drivers/usb/host/f_usb20ho_hcd.c
@@ -0,0 +1,306 @@
+/**
+ * f_usb20ho_hcd.c - Fujitsu EHCI platform driver
+ *
+ * Copyright (c) 2013 - 2014 FUJITSU SEMICONDUCTOR LIMITED
+ * http://jp.fujitsu.com/group/fsl
+ *
+ * based on bcma-hcd.c
+ *
+ * Author: Sneeker Yeh <Sneeker.Yeh@tw.fujitsu.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+#include <linux/dma-mapping.h>
+#include <linux/of.h>
+#include <linux/pm_runtime.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "f_usb20ho_hcd.h"
+
+static int f_usb20ho_clk_control(struct device *dev, bool on)
+{
+ int ret, i;
+ struct clk *clk;
+
+ if (!on)
+ goto clock_off;
+
+ for (i = 0;; i++) {
+ clk = of_clk_get(dev->of_node, i);
+ if (IS_ERR(clk))
+ break;
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ dev_err(dev, "failed to enable clock[%d]\n", i);
+ goto clock_off;
+ }
+ }
+
+ return 0;
+
+clock_off:
+ for (i = 0;; i++) {
+ clk = of_clk_get(dev->of_node, i);
+ if (IS_ERR(clk))
+ break;
+
+ clk_disable_unprepare(clk);
+ }
+
+ return on;
+}
+
+static struct platform_device *f_usb20ho_hcd_create_pdev(
+ struct platform_device *pdev, bool ohci)
+{
+ struct resource *resource;
+ struct platform_device *hci_dev;
+ struct resource hci_res[2];
+ int ret = -ENOMEM;
+ int irq;
+ resource_size_t resource_size;
+
+ memset(hci_res, 0, sizeof(hci_res));
+
+ resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!resource) {
+ dev_err(&pdev->dev, "%s() platform_get_resource() failed\n"
+ , __func__);
+ ret = -ENODEV;
+ goto err_res;
+ }
+ resource_size = resource->end - resource->start + 1;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev,
+ "%s() platform_get_irq() for F_USB20HO failed at %d\n",
+ __func__, irq);
+ ret = -ENODEV;
+ goto err_res;
+ }
+
+ hci_res[0].start = ohci ? resource->start + F_OHCI_OFFSET :
+ resource->start + F_EHCI_OFFSET;
+ hci_res[0].end = ohci ?
+ resource->start + F_OHCI_OFFSET + F_OHCI_SIZE - 1 :
+ resource->start + F_EHCI_OFFSET + F_EHCI_SIZE - 1;
+ hci_res[0].flags = IORESOURCE_MEM;
+
+ hci_res[1].start = irq;
+ hci_res[1].flags = IORESOURCE_IRQ;
+
+ hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
+ "ehci-platform", 0);
+ if (!hci_dev) {
+ dev_err(&pdev->dev, "platform_device_alloc() failed\n");
+ ret = -ENODEV;
+ goto err_res;
+ }
+
+ dma_set_coherent_mask(&hci_dev->dev, pdev->dev.coherent_dma_mask);
+ hci_dev->dev.parent = &pdev->dev;
+ hci_dev->dev.dma_mask = pdev->dev.dma_mask;
+
+ ret = platform_device_add_resources(hci_dev, hci_res,
+ ARRAY_SIZE(hci_res));
+ if (ret) {
+ dev_err(&pdev->dev
+ , "platform_device_add_resources() failed\n");
+ goto err_alloc;
+ }
+
+ ret = platform_device_add(hci_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "platform_device_add() failed\n");
+ goto err_alloc;
+ }
+
+ return hci_dev;
+
+err_alloc:
+ platform_device_put(hci_dev);
+err_res:
+ return ERR_PTR(ret);
+}
+
+static u64 f_usb20ho_dma_mask = DMA_BIT_MASK(32);
+
+static int f_usb20ho_hcd_probe(struct platform_device *pdev)
+{
+ int err;
+ struct f_usb20ho_hcd *usb_dev;
+ struct device *dev = &pdev->dev;
+
+ dev->dma_mask = &f_usb20ho_dma_mask;
+ if (!dev->coherent_dma_mask)
+ dev->coherent_dma_mask = DMA_BIT_MASK(32);
+
+ usb_dev = kzalloc(sizeof(*usb_dev), GFP_KERNEL);
+ if (!usb_dev)
+ return -ENOMEM;
+
+ usb_dev->dev = &pdev->dev;
+ platform_set_drvdata(pdev, usb_dev);
+
+ usb_dev->irq = platform_get_irq(pdev, 0);
+ if (usb_dev->irq < 0) {
+ dev_err(&pdev->dev,
+ "%s() platform_get_irq() for F_USB20HO failed at %d\n",
+ __func__, usb_dev->irq);
+ err = -ENODEV;
+ goto err_free_usb_dev;
+ }
+ disable_irq(usb_dev->irq);
+
+ /* resume driver for clock, power, irq */
+ pm_runtime_enable(&pdev->dev);
+ err = pm_runtime_get_sync(&pdev->dev);
+ if (err < 0) {
+ dev_err(&pdev->dev, "get_sync failed with err %d\n", err);
+ goto err_unregister_ohci_dev;
+ }
+
+ usb_dev->ehci_dev = f_usb20ho_hcd_create_pdev(pdev, false);
+ if (IS_ERR(usb_dev->ehci_dev)) {
+ dev_err(&pdev->dev, "failed to create EHCI driver\n");
+ err = -ENODEV;
+ goto err_free_usb_dev;
+ }
+
+ usb_dev->ohci_dev = f_usb20ho_hcd_create_pdev(pdev, true);
+ if (IS_ERR(usb_dev->ohci_dev)) {
+ dev_err(&pdev->dev, "failed to create OHCI driver\n");
+ err = -ENODEV;
+ goto err_unregister_ehci_dev;
+ }
+
+ return 0;
+
+err_unregister_ohci_dev:
+ platform_device_unregister(usb_dev->ohci_dev);
+err_unregister_ehci_dev:
+ platform_device_unregister(usb_dev->ehci_dev);
+ pm_runtime_put_sync(&pdev->dev);
+err_free_usb_dev:
+ kfree(usb_dev);
+
+ return err;
+}
+
+static int f_usb20ho_hcd_remove(struct platform_device *pdev)
+{
+ struct f_usb20ho_hcd *usb_dev = platform_get_drvdata(pdev);
+ struct platform_device *ohci_dev = usb_dev->ohci_dev;
+ struct platform_device *ehci_dev = usb_dev->ehci_dev;
+
+ if (ohci_dev)
+ platform_device_unregister(ohci_dev);
+ if (ehci_dev)
+ platform_device_unregister(ehci_dev);
+
+ /* disable power,clock,irq */
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+#ifdef CONFIG_PM_RUNTIME
+static int f_usb20ho_runtime_suspend(struct device *dev)
+{
+ struct f_usb20ho_hcd *usb_dev = dev_get_drvdata(dev);
+
+ disable_irq(usb_dev->irq);
+ f_usb20ho_clk_control(dev, false);
+
+ return 0;
+}
+
+static int f_usb20ho_runtime_resume(struct device *dev)
+{
+ struct f_usb20ho_hcd *usb_dev = dev_get_drvdata(dev);
+
+ f_usb20ho_clk_control(dev, true);
+ enable_irq(usb_dev->irq);
+
+ return 0;
+}
+#endif /* CONFIG_PM_RUNTIME */
+
+static int f_usb20ho_hcd_suspend(struct device *dev)
+{
+ if (pm_runtime_status_suspended(dev))
+ return 0;
+
+ return f_usb20ho_runtime_suspend(dev);
+}
+
+static int f_usb20ho_hcd_resume(struct device *dev)
+{
+ if (pm_runtime_status_suspended(dev))
+ return 0;
+
+ return f_usb20ho_runtime_resume(dev);
+}
+
+static const struct dev_pm_ops f_usb20ho_hcd_ops = {
+ .suspend = f_usb20ho_hcd_suspend,
+ .resume = f_usb20ho_hcd_resume,
+ SET_RUNTIME_PM_OPS(f_usb20ho_runtime_suspend
+ , f_usb20ho_runtime_resume, NULL)
+};
+
+#define DEV_PM (&f_usb20ho_hcd_ops)
+#else /* !CONFIG_PM */
+#define DEV_PM NULL
+#endif /* CONFIG_PM */
+
+static void f_usb20ho_hcd_shutdown(struct platform_device *pdev)
+{
+#ifdef CONFIG_PM
+ f_usb20ho_hcd_suspend(&pdev->dev);
+#endif
+}
+
+static const struct of_device_id f_usb20ho_hcd_dt_ids[] = {
+ { .compatible = "fujitsu,f_usb20ho_hcd" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, f_usb20ho_hcd_dt_ids);
+
+static struct platform_driver f_usb20ho_hcd_driver = {
+ .probe = f_usb20ho_hcd_probe,
+ .remove = __exit_p(f_usb20ho_hcd_remove),
+ .shutdown = f_usb20ho_hcd_shutdown,
+ .driver = {
+ .name = "f_usb20ho_hcd",
+ .owner = THIS_MODULE,
+ .pm = DEV_PM,
+ .of_match_table = f_usb20ho_hcd_dt_ids,
+ },
+};
+
+module_platform_driver(f_usb20ho_hcd_driver);
+
+MODULE_ALIAS("platform:f_usb20ho_hcd");
+MODULE_AUTHOR("Sneeker Yeh <Sneeker.Yeh@tw.fujitsu.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("USB platform driver for f_usb20ho_lap IP ");
diff --git a/drivers/usb/host/f_usb20ho_hcd.h b/drivers/usb/host/f_usb20ho_hcd.h
new file mode 100644
index 0000000..046c636
--- /dev/null
+++ b/drivers/usb/host/f_usb20ho_hcd.h
@@ -0,0 +1,35 @@
+/*
+ * linux/drivers/usb/host/f_usb20ho_hcd.h - F_USB20HDC USB
+ * host controller driver
+ *
+ * Copyright (C) FUJITSU ELECTRONICS INC. 2011. All rights reserved.
+ * Copyright (C) 2013 - 2014 FUJITSU SEMICONDUCTOR LIMITED.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _F_USB20HO_HCD_H
+#define _F_USB20HO_HCD_H
+
+#define F_EHCI_OFFSET 0x40000
+#define F_EHCI_SIZE 0x1000
+#define F_OHCI_OFFSET 0x41000
+#define F_OHCI_SIZE 0x1000
+#define F_OTHER_OFFSET 0x42000
+#define F_OTHER_SIZE 0x1000
+
+struct f_usb20ho_hcd {
+ struct device *dev;
+ struct platform_device *ehci_dev;
+ struct platform_device *ohci_dev;
+ int irq;
+};
+#endif
--
1.7.9.5


\
 
 \ /
  Last update: 2014-12-16 03:41    [W:0.100 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site