lkml.org 
[lkml]   [2014]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/2] mfd: dt-bindings: add the description about dvs gpio for rk808
Date
add the description about dvs1, dvs2, dvsok, and add the example.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>

---

Changes in v3:
- Modify the syntax error

Changes in v2:
- increase description about dvs pins

Documentation/devicetree/bindings/mfd/rk808.txt | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
index 9e6e259..9cc2941 100644
--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -24,6 +24,14 @@ Optional properties:
- vcc10-supply: The input supply for LDO_REG6
- vcc11-supply: The input supply for LDO_REG8
- vcc12-supply: The input supply for SWITCH_REG2
+- dvs-gpios: buck1/2 can be controlled by gpio dvs, this is GPIO specifiers
+ for 2 host gpio's used for dvs. The format of the gpio specifier depends in
+ the gpio controller. If DVS GPIOs aren't present, voltage changes will happen
+ very quickly with no slow ramp time.
+- dvsok-gpios: if we use dvs gpio to control buck1/2, this gpio will be pull
+ high, once RK808 completed the adjustment of voltage. If the DVSOK isn't
+ present, we'll just delay based on whatever is specified in the regulator
+ constraints.

Regulators: All the regulators of RK808 to be instantiated shall be
listed in a child node named 'regulators'. Each regulator is represented
@@ -55,7 +63,10 @@ Example:
interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&pmic_int>;
+ pinctrl-0 = <&pmic_int &dvs_ok &dvs_1 &dvs_2>;
+ dvsok-gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
+ <&gpio7 15 GPIO_ACTIVE_HIGH>;
reg = <0x1b>;
rockchip,system-power-controller;
wakeup-source;
--
1.9.1


\
 
 \ /
  Last update: 2014-12-15 04:41    [W:0.091 / U:1.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site