lkml.org 
[lkml]   [2014]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: pxa: lubbock: use new cottula driver
Date
As the interrupt handling was transferred to the cottula driver, make
the switch in lubbock platform code.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
arch/arm/mach-pxa/include/mach/lubbock.h | 7 +-
arch/arm/mach-pxa/lubbock.c | 112 +++++++++----------------------
2 files changed, 37 insertions(+), 82 deletions(-)

diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index 958cd6af..f602e6a 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -37,7 +37,9 @@
#define LUB_GP __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)

/* Board specific IRQs */
-#define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x))
+#define LUBBOCK_NR_IRQS IRQ_BOARD_START
+
+#define LUBBOCK_IRQ(x) (LUBBOCK_NR_IRQS + (x))
#define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0)
#define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1)
#define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */
@@ -47,8 +49,7 @@
#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */
#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6)

-#define LUBBOCK_SA1111_IRQ_BASE (IRQ_BOARD_START + 16)
-#define LUBBOCK_NR_IRQS (IRQ_BOARD_START + 16 + 55)
+#define LUBBOCK_SA1111_IRQ_BASE (LUBBOCK_NR_IRQS + 16)

#ifndef __ASSEMBLY__
extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index d8a1be6..44e35b7 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -12,6 +12,7 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -123,84 +124,6 @@ void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
}
EXPORT_SYMBOL(lubbock_set_misc_wr);

-static unsigned long lubbock_irq_enabled;
-
-static void lubbock_mask_irq(struct irq_data *d)
-{
- int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
- LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
-}
-
-static void lubbock_unmask_irq(struct irq_data *d)
-{
- int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
- /* the irq can be acknowledged only if deasserted, so it's done here */
- LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
- LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
-}
-
-static struct irq_chip lubbock_irq_chip = {
- .name = "FPGA",
- .irq_ack = lubbock_mask_irq,
- .irq_mask = lubbock_mask_irq,
- .irq_unmask = lubbock_unmask_irq,
-};
-
-static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
- do {
- /* clear our parent irq */
- desc->irq_data.chip->irq_ack(&desc->irq_data);
- if (likely(pending)) {
- irq = LUBBOCK_IRQ(0) + __ffs(pending);
- generic_handle_irq(irq);
- }
- pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
- } while (pending);
-}
-
-static void __init lubbock_init_irq(void)
-{
- int irq;
-
- pxa25x_init_irq();
-
- /* setup extra lubbock irqs */
- for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
- irq_set_chip_and_handler(irq, &lubbock_irq_chip,
- handle_level_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
-
- irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler);
- irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-#ifdef CONFIG_PM
-
-static void lubbock_irq_resume(void)
-{
- LUB_IRQ_MASK_EN = lubbock_irq_enabled;
-}
-
-static struct syscore_ops lubbock_irq_syscore_ops = {
- .resume = lubbock_irq_resume,
-};
-
-static int __init lubbock_irq_device_init(void)
-{
- if (machine_is_lubbock()) {
- register_syscore_ops(&lubbock_irq_syscore_ops);
- return 0;
- }
- return -ENODEV;
-}
-
-device_initcall(lubbock_irq_device_init);
-
-#endif
-
static int lubbock_udc_is_connected(void)
{
return (LUB_MISC_RD & (1 << 9)) == 0;
@@ -383,11 +306,33 @@ static struct platform_device lubbock_flash_device[2] = {
},
};

+static struct resource cottula_resources[] = {
+ [0] = {
+ .start = LUBBOCK_FPGA_PHYS,
+ .end = LUBBOCK_FPGA_PHYS + 256 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = LUBBOCK_IRQ(0),
+ .end = LUBBOCK_IRQ(0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cottula_device = {
+ .name = "cottula",
+ .id = -1,
+ .resource = &cottula_resources[0],
+ .num_resources = 2,
+};
+
+
static struct platform_device *devices[] __initdata = {
&sa1111_device,
&smc91x_device,
&lubbock_flash_device[0],
&lubbock_flash_device[1],
+ &cottula_device,
};

static struct pxafb_mode_info sharp_lm8v31_mode = {
@@ -504,11 +449,20 @@ static struct pxaficp_platform_data lubbock_ficp_platform_data = {
.transceiver_mode = lubbock_irda_transceiver_mode,
};

+static struct gpiod_lookup_table cottula_gpios_table = {
+ .dev_id = "cottula",
+ .table = {
+ GPIO_LOOKUP("gpio-0", 0, "lubbock_irq", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static void __init lubbock_init(void)
{
int flashboot = (LUB_CONF_SWITCHES & 1);

pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
+ gpiod_add_lookup_table(&cottula_gpios_table);

pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
@@ -648,7 +602,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
/* Maintainer: MontaVista Software Inc. */
.map_io = lubbock_map_io,
.nr_irqs = LUBBOCK_NR_IRQS,
- .init_irq = lubbock_init_irq,
+ .init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.init_time = pxa_timer_init,
.init_machine = lubbock_init,
--
2.1.0


\
 
 \ /
  Last update: 2014-12-15 00:41    [W:0.029 / U:1.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site