lkml.org 
[lkml]   [2014]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[GIT PULL] USB driver patches for 3.19-rc1
The following changes since commit 009d0431c3914de64666bec0d350e54fdd59df6a:

Linux 3.18-rc7 (2014-11-30 16:42:27 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/ tags/usb-3.19-rc1

for you to fetch changes up to 81e1dadfb5b2d47aa513ad60b1c9cf0ea17b6514:

arm: omap3: twl: remove usb phy init data (2014-12-10 22:37:20 -0500)

----------------------------------------------------------------
USB patches for 3.19-rc1

Here's the big set of USB and PHY patches for 3.19-rc1.

The normal churn in the USB gadget area is in here, as well as xhci and
other individual USB driver updates. The PHY tree is also in here, as
there were dependancies on the USB tree.

All of these have been in linux-next.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

----------------------------------------------------------------
Alan Stern (4):
usb: gadget: dummy-hcd: use udc-core's reset notifier
usb: gadget: net2280: use udc-core's reset notifier
usb: gadget: net2272: use udc-core's reset notifier
USB: host: Remove ehci-octeon and ohci-octeon drivers

Alexandre Belloni (1):
USB: OHCI: ohci-at91: remove unnecessary headers

Alexey Khoroshilov (1):
usbip: fix error handling in stub_probe()

Andrew Lunn (1):
Phy: DT binding documentation for Marvell MVEBU SATA phy.

Andrzej Pietrasiewicz (17):
usb: gadget: configfs: add suspend/resume
usb: gadget: Kconfig: enable separate compilation of uac1/uac2 functions
usb: gadget: f_midi: enable use of the index parameter
usb: gadget: f_midi: check kstrdup() return value
usb: gadget: f_midi: convert to new function interface with backward compatibility
usb: gadget: midi: convert to new interface of f_midi
usb: gadget: f_midi: remove compatibility layer
usb: gadget: f_midi: use usb_gstrings_attach
usb: gadget: f_midi: add configfs support
usb: gadget: f_hid: check return value of class_create
usb: gadget: f_hid: check return value of device_create
usb: gadget: hid: mirror init operations in module cleanup
usb: gadget: f_hid: convert to new function interface with backward compatibility
usb: gadget: hid: convert to new interface of f_hid
usb: gadget: f_hid: remove compatibility layer
usb: gadget: f_hid: use usb_gstrings_attach
usb: gadget: hid: add configfs support

Antoine Tenart (10):
usb: move the OTG state from the USB PHY to the OTG structure
usb: rename phy to usb_phy in OTG
usb: add support to the generic PHY framework in OTG
usb: allow to supply the PHY in the drivers when using HCD
usb: chipidea: add support to the generic PHY framework
phy: add the Berlin USB PHY driver
Documentation: bindings: add doc for the Berlin USB PHY
usb: chipidea: fix phy handling
usb: chipidea: add a usb2 driver for ci13xxx
Documentation: bindings: add doc for the USB2 ChipIdea USB driver

Anton Staaf (1):
USB: serial: add Google simple serial SubClass support

Arjun Sreedharan (1):
usb: phy: propagate __of_usb_find_phy()'s error on failure

Ashwini Pahuja (1):
usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC

Bo Shen (2):
usb: gadget: at91_udc: remove unused release function
usb: gadget: atmel_usba_udc: remove release function

Chris Rorvick (10):
usb: Create separate header for ehci-dbgp
fusbh200: Make Xen notificaiton consistent with EHCI
fusbh200: Remove superfluous macro definitions
fusbh200: Remove duplicate ehci-dbgp declarations
fusbh200: Use ehci_dbg_port struct
fotg210: Make Xen notification consistent with EHCI
fotg210: Remove superfluous macro definitions
fotg210: Remove duplicate ehci-dbgp declarations
fotg210: Use ehci_dbg_port struct
usb: Remove __init from early_dbgp_init() prototype

Dan Carpenter (6):
usb: gadget: f_uac1: remove an unneeded NULL check
usb: gadget: f_hid: use after free in hidg_alloc_inst()
usb: gadget: f_hid: fix error handling in ghid_setup()
USB: adutux: NULL dereferences on disconnect
USB: mos7720: delete some unneeded code
usb: gadget: udc: missing curly braces

Dinh Nguyen (10):
usb: dwc2: allow dwc2 to get built when USB_GADGET=m
usb: dwc2: Update the gadget driver to use common dwc2_hsotg structure
usb: dwc2: Move gadget probe function into platform code
usb: dwc2: convert to use dev_pm_ops API
usb: dwc2: Initialize the USB core for peripheral mode
usb: dwc2: Update common interrupt handler to call gadget interrupt handler
usb: dwc2: gadget: Do not fail probe if there isn't a clock node
usb: dwc2: move usb_disabled() call to host driver only
usb: dwc2: Update Kconfig to support dual-role
usb: dwc2: remove early return on clock query

Fabio Estevam (5):
usb: dwc2: Fix build warning when CONFIG_PM_SLEEP=n
usb: chipidea: core: Remove unneeded OOM message
usb: chipidea: ci_hdrc_imx.c: Remove unneeded OOM message
usb: chipidea: usbmisc_imx: Move the reading of USB_PHY_CTRL
usb: chipidea: usbmisc_imx: Read MX53_USB_OTG_PHY_CTRL_1_OFFSET directly

Felipe Balbi (51):
usb: dwc3: core: write LINUX_VERSION_CODE to our GUID register
usb: dwc3: trace: remove unnecessary newline character
usb: gadget: composite: introduce setup and os_desc pending flags
usb: gadget: composite: set our req->context to cdev
usb: gadget: composite: conditionally dequeue os_desc and setup requests
usb: dwc3: ep0: trace ep0 TRBs too
usb: dwc3: get rid of ->prepare()/->complete()
usb: gadget: udc-core: call ->disconnect() when soft disconnecting
usb: gadget: udc: document our sysfs ABI
usb: dwc3: gadget: set state to NOT_ATTACHED on disconnect_irq
usb: dwc3: gadget: WARN() on bogus usb_ep_queue()
usb: gadget: udc: amd5536: do not rely on 'driver' argument
usb: gadget: udc: at91: do not rely on 'driver' argument
usb: gadget: udc: dummy: do not rely on 'driver' argument
usb: gadget: udc: fsl_qe: do not rely on 'driver' argument
usb: gadget: udc: lpc32xx: do not rely on 'driver' argument
usb: gadget: udc: mv_u3d: do not rely on 'driver' argument
usb: gadget: udc: mv_udc: do not rely on 'driver' argument
usb: gadget: udc: net2272: do not rely on 'driver' argument
usb: gadget: udc: net2280: do not rely on 'driver' argument
usb: gadget: udc: pxa25x: do not rely on 'driver' argument
usb: gadget: udc: pxa27x: do not rely on 'driver' argument
usb: gadget: udc: s3c-hsudc: do not rely on 'driver' argument
usb: musb: gadget: do not rely on 'driver' argument
usb: gadget: udc: pass a single argument to usb_gadget_udc_start/stop
usb: gadget: udc: at91: remove bind/unbind messages
usb: gadget: udc: atmel_usba: remove bind/unbind messages
usb: gadget: udc: dummy: remove bind/unbind messages
usb: gadget: udc: fsl_qe: remove bind/unbind messages
usb: gadget: udc: gr_udc: remove bind/unbind messages
usb: gadget: udc: net2272: remove bind/unbind messages
usb: gadget: udc: net2280: remove bind/unbind messages
usb: gadget: udc: s3c-hsudc: remove bind/unbind messages
usb: musb: gadget: remove bind/unbind messages
usb: gadget: udc: core: fix unregistering message
usb: gadget: remove unnecessary 'driver' argument
usb: gadget: udc: core: prepend udc_attach_driver with usb_
usb: dwc2: gadget: do not call usb_gadget_unregister_driver()
usb: gadget: udc: dummy: do not call usb_gadget_unregister_driver()
usb: gadget: udc: net2272: do not call usb_gadget_unregister_driver()
usb: gadget: udc: pxa27x: do not call usb_gadget_unregister_driver()
usb: dwc3: core: enable phy suspend quirk on non-FPGA
arm: boot: dts: am4372: enable dwc3 suspend PHY quirk
phy: twl4030: Fix build breakage
usb: dwc3: gadget: use udc-core's reset notifier
usb: musb: gadget: use udc-core's reset notifier
usb: host: ohci: omap: fix build breakage
usb: phy: fsl: Fix build errors
usb: dwc3: trace: don't save pointers
usb: gadget: udc: lpc32xx: remove unnecessary NULL check
usb: gadget: udc: pxa25x: remove unnecessary NULL check

Fengguang Wu (3):
usb: gadget: fix ptr_ret.cocci warnings
usb: gadget: f_hid: hidg_alloc() can be static
usb: gadget: midi: f_midi_alloc() can be static

Gabriel FERNANDEZ (6):
phy: Add PHY header file for DT x Driver defines
phy: miphy28lp: Add Device Tree bindings for the MiPHY28lp
phy: miphy28lp: Provide support for the MiPHY28lp Generic PHY
phy: miphy28lp: Add SSC support for SATA
phy: miphy28lp: Add SSC support for PCIE
phy: miphy28lp: Tune tx impedance across Soc cuts

Geert Uytterhoeven (1):
uwb: Remove bogus colon after newline from debug message

George Cherian (2):
usb: dwc3: dwc3-omap: get rid of ->prepare()/->complete()
usb: musb: core: Disable the Interrupts till BABBLE is fully handled

Greg Kroah-Hartman (6):
Merge 3.18-rc4 into usb-next.
USB: cdc-acm: check for valid interfaces
Merge tag 'usb-for-v3.19' of git://git.kernel.org/.../balbi/usb into usb-next
Merge tag 'usb-serial-3.19-rc1' of git://git.kernel.org/.../johan/usb-serial into usb-next
Merge tag 'for-3.19' of git://git.kernel.org/.../kishon/linux-phy into usb-testing
Merge 3.18-rc7 into usb-next

Gregory CLEMENT (3):
phy: Use PTR_ERR_OR_ZERO to fix warning raised by coccinelle
Phy: DT binding documentation for the Armada 375 USB cluster binding
phy: add support for USB cluster on the Armada 375 SoC

Hans de Goede (1):
uas: Make uas work with blk-mq

Heikki Krogerus (8):
usb: dwc3: core: only setting the dma_mask when needed
usb: dwc3: add ACPI support
phy: safer to_phy() macro
phy: improved lookup method
phy: twl4030: use the new lookup method
phy: remove the old lookup method
usb: dwc3: host: convey the PHYs to xhci
arm: omap3: twl: remove usb phy init data

Huang Rui (20):
usb: dwc3: enable hibernation if to be supported
usb: dwc3: add a flag to check if it is fpga board
usb: dwc3: initialize platform data at pci glue layer
usb: dwc3: add disscramble quirk
usb: dwc3: add lpm erratum support
usb: dwc3: add u2exit lfps quirk
usb: dwc3: add P3 in U2 SS inactive quirk
usb: dwc3: add request p1p2p3 quirk
usb: dwc3: add delay p1p2p3 quirk
usb: dwc3: add delay phy power change quirk
usb: dwc3: add lfps filter quirk
usb: dwc3: add rx_detect to polling lfps quirk
usb: dwc3: set SUSPHY bit for all cores
usb: dwc3: add Tx de-emphasis quirk
usb: dwc3: add disable usb3 suspend phy quirk
usb: dwc3: add disable usb2 suspend phy quirk
PCI: Add support for AMD Nolan USB3 DRD
PCI: Prevent xHCI driver from claiming AMD Nolan USB3 DRD device
usb: dwc3: add support for AMD Nolan platform
usb: dwc3: make HIRD threshold configurable

Jingoo Han (3):
USB: imx21-hcd: use %pad for dma_addr_t
usb: dwc3: exynos: remove non-DT support for Exynos Specific Glue layer
usb: dwc3: ep0: remove unnecessary break after return

Joe Perches (1):
usb: storage: Convert usb_stor_dbg to return void

Johan Hovold (3):
USB: kobil_sct: replace unnecessary atomic allocation
USB: mos7720: replace unnecessary atomic allocations
USB: mos7840: replace unnecessary atomic allocations

Jorge Ramirez-Ortiz (1):
usb: gadget: add USB3 support to the printer driver

Josef Gajdusek (1):
usb: Do not re-read descriptors for wired devices in usb_authorize_device()

Julia Lawall (5):
usb: dwc3: keystone: fix error return code
usb: dwc3: return error code from the most recent call
host: ehci-w90x900: fix error return code
usbip: remove unneeded structure
wusb: replace memset by memzero_explicit

Kazuya Mizuguchi (1):
usb: renesas_usbhs: gadget: fix NULL pointer dereference in ep_disable()

Kever Yang (1):
usb: dwc2: add bus suspend/resume for dwc2

Kevin Cernekee (3):
USB: OHCI: Eliminate platform-specific test in ohci.h
USB: ohci-platform: Expose no_big_frame_no and num_ports in DT
USB: ohci-platform: Move platform_data checks into the probe function

Kiran Raparthy (2):
usb: phy: introduce usb_phy_set_event interface
usb: phy: Handle per-PHY event for connnect and disconnect events

Kishon Vijay Abraham I (1):
phy: phy-core: use the np present in of_phandle_args to get the PHY

Kyösti Mälkki (1):
usb: gadget: dbgp: Fix endpoint config after USB disconnect

Lu Baolu (1):
usb: xhci: fix comment for PORT_DEV_REMOVE

Marcin Wojtas (1):
usb: ehci-orion: enable big-endian support

Marek Szyprowski (8):
usb: dwc2: gadget: move setting last reset time to s3c_hsotg_core_init
usb: dwc2: gadget: decouple setting soft-disconnect from s3c_hsotg_core_init
usb: dwc2: gadget: move phy control calls out of pullup() method
usb: dwc2: gadget: use soft-disconnect udc feature in pullup() method
usb: dwc2: gadget: fix calls to phy control functions in suspend/resume code
usb: dwc2: gadget: rework disconnect event handling
usb: dwc2: gadget: add mutex to serialize init/deinit calls
usb: dwc2: gadget: rework suspend/resume code to correctly restore gadget state

Mario Schuknecht (1):
usb: gadget: net2280: Fix superspeed dma_done()

Mark Knibbs (4):
USB: serial: keyspan_pda: fix Entrega company name spelling
USB: storage: Reject bogus max LUN values
storage: Enable multi-target mode as vendor driver does for SCM eUSCSI bridge
storage: Fix bus scan and multi-LUN support for SCM eUSCSI devices

Markus Elfring (4):
usb: gadget: function: delete an unnecessary check before rndis_add_hdr()
USB-IP: Deletion of unnecessary checks before the function call "usb_put_dev"
USB-SIS: Deletion of an unnecessary check before the function call "usb_put_dev"
USB: PCI-quirks: Deletion of unnecessary checks before the function call "pci_dev_put"

Martin Hauke (1):
USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem

Mathias Nyman (3):
xhci: cleanup finish_td function
xhci: clear extra bits from slot context when setting max exit latency
xhci: don't use the same variable for stopped and halted rings current TD

Michael Grzeschik (2):
usb: ehci: add ehci_port_power interface
usb: chipidea: host: add portpower override

Mickael Maison (1):
usb: chipidea: Fixed a few typos in comments

Oliver Neukum (2):
cdc-acm: Drop the warning for unusual capabilities
cdc-acm: memory leak in error case

Paul Bolle (1):
usb: host: Remove optional dependencies on PLAT_S5P

Pavitrakumar Managutte (1):
usb: gadget: function: Added usb_assign_descriptors failure check

Peter Chen (47):
usb: gadget: mv_udc_core: delete unnecessary 'out of memory' messages
usb: gadget: fsl_qe_udc: delete unnecessary 'out of memory' messages
usb: gadget: bcm63xx_udc: delete unnecessary 'out of memory' messages
usb: gadget: s3c-hsudc: delete unnecessary 'out of memory' messages
usb: musb: davinci: delete unnecessary 'out of memory' messages
usb: musb: ux500: delete unnecessary 'out of memory' messages
usb: musb: omap2430: delete unnecessary 'out of memory' messages
usb: musb: blackfin: delete unnecessary 'out of memory' messages
usb: musb: tusb6010: delete unnecessary 'out of memory' messages
usb: musb: musb_dsps: delete unnecessary 'out of memory' messages
usb: phy: phy-rcar-usb: delete unnecessary 'out of memory' messages
usb: phy: phy-tegra-usb: delete unnecessary 'out of memory' messages
usb: phy: phy-am335x-control: delete unnecessary 'out of memory' messages
usb: phy: phy-rcar-gen2-usb: delete unnecessary 'out of memory' messages
usb: phy: phy-mxs-usb: delete unnecessary 'out of memory' messages
usb: phy: phy-msm-usb: delete unnecessary 'out of memory' messages
usb: phy: phy-mv-usb: delete unnecessary 'out of memory' messages
usb: renesas_usbhs: delete unnecessary 'out of memory' messages
usb: chipidea: otg_fsm: delete unnecessary 'out of memory' messages
usb: class: usbtmc: delete unnecessary 'out of memory' messages
usb: host: ehci-mv: delete unnecessary 'out of memory' messages
usb: host: ehci-sh: delete unnecessary 'out of memory' messages
usb: host: ehci-tegra: delete unnecessary 'out of memory' messages
usb: host: oxu210hp-hcd: delete unnecessary 'out of memory' messages
usb: misc: usb3503: delete unnecessary 'out of memory' messages
usb: renesas_usbhs: delete unnecessary 'out of memory' messages
usb: chipidea: gadget: use udc-core's reset notifier
usb: gadget: pxa25x_udc: use udc-core's reset notifier
usb: gadget: m66592-udc: use udc-core's reset notifier
usb: gadget: fsl_udc_core: use udc-core's reset notifier
usb: gadget: at91_udc: use udc-core's reset notifier
usb: gadget: mv_udc_core: use udc-core's reset notifier
usb: gadget: fsl_qe_udc: use udc-core's reset notifier
usb: gadget: pch_udc: use udc-core's reset notifier
usb: gadget: amd5536udc: use udc-core's reset notifier
usb: gadget: r8a66597-udc: use udc-core's reset notifier
usb: gadget: bcm63xx_udc: use udc-core's reset notifier
usb: gadget: atmel_usba_udc: use udc-core's reset notifier
usb: chipidea: using devm_request_irq to instead of request_irq
usb: chipidea: remove the unnecessary delay after clear portsc.phcd
usb: chipidea: add hw_wait_phy_stable for getting stable status
usb: chipidea: add system power management support
usb: chipidea: imx: add system power management support
usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER
usb: chipidea: add controller reset API
usb: chipidea: parameter 'mode' isn't needed for hw_device_reset
usb: chipidea: remove duplicate dev_set_drvdata for host_start

Robert Jarzmik (7):
usb: gadget: pxa27x_udc: prepare device-tree support
usb: gadget: pxa27x_udc: transfer mach_info into pxa_udc
usb: gadget: pxa27x_udc: add devicetree support
usb: gadget: pxa27x_udc device-tree documentation
usb: gadget: pxa27x_udc: use devm_* helpers
usb: gadget: pxa27x_udc: fix clock prepare and enable
usb: gadget: pxa27x_udc: fix warning in non device-tree build

Roman Byshko (2):
phy: sun4i: add support for USB phy0
usb: musb: replace hard coded registers with defines

Ronald Wahl (1):
usb: gadget: at91_udc: move prepare clk into process context

Sebastian Andrzej Siewior (5):
usb: musb: core: use ->resume instead ->resume_noirq
usb: musb: core: check link status on resume
usb: musb: try a race-free wakeup
usb: musb: core: make sure musb is in RPM_ACTIVE on resume
usb: musb: musb_cppi41: recognize HS devices in hostmode

Sebastian Hesselbarth (3):
phy: berlin-sata: Move PHY_BASE into private data struct
phy: berlin-sata: Add support for BG2 SATA PHY
phy: berlin-sata: Document BG2 compatible

Sergei Shtylyov (2):
usb: musb: omap2430: use MUSB_DEVCTL_BDEVICE
usb: phy: remove file names from heading comments

Sudip Mukherjee (2):
usb: yurex: fixed sparse warning of incorrect type
usb: hub: remove unused variable

Takeshi Kihara (1):
usb: renesas_usbhs: gadget: fix the behavior of pullup

Tony Lindgren (8):
usb: musb: Add function pointers for IO access functions
usb: musb: Populate new IO functions for tusb6010
usb: musb: Populate new IO functions for blackfin
usb: musb: Change to use new IO access
usb: musb: Change end point selection to use new IO access
usb: musb: Pass fifo_mode in platform data
usb: musb: Allow multiple glue layers to be built in
usb: musb: Use IS_ENABLED for tusb6010

Varka Bhadram (34):
usb: dwc3: keystone: remove duplicate check on resource
usb: renesas_usbhs: common: remove duplicate check on resource
usb: phy: rcar-usb: remove duplicate check on resource
usb: musb: dsps: remove duplicate check on resource
usb: musb: core: remove duplicate check on resource
host: uhci-platform: fix NULL pointer dereference on resource
host: ehci-sead3: fix NULL pointer dereference on resource
host: ehci-atmel: remove duplicate check on resource
host: ohci-da8xx: remove duplicate check on resource
host: ehci-tegra: remove duplicate check on resource
host: ehci-w90x900: remove duplicate check on resource
host: ohci-at91: remove duplicate check on resource
host: ohci-exynos: remove duplicate check on resource
host: ohci-jz4740: remove duplicate check on resource
host: ohci-octeon: remove duplicate check on resource
host: ohci-platform: remove duplicate check on resource
host: ohci-pxa27x: remove duplicate check on resource
host: ehci-sh: remove duplicate check on resource
host: ohci-spear: remove duplicate check on resource
host: ehci-msm: remove duplicate check on resource
host: ehci-mv: remove duplicate check on resource
host: ehci-mxc: remove duplicate check on resource
host: ehci-octeon: remove duplicate check on resource
host: ehci-orion: remove duplicate check on resource
host: ehci-platform: remove duplicate check on resource
host: ehci-spear: remove duplicate check on resource
host: xhci-plat: remove duplicate check on resource
musb: musb_core: remove duplicate check on resource
musb: musb_dsps: remove duplicate check on resource
phy: phy-rcar-usb: remove duplicate check on resource
dwc3: dwc3-keystone: remove duplicate check on resource
host: ehci-fsl: remove duplicate check on resource
host: ehci-exynos: remove duplicate check on resource
renesas_usbhs: common: remove duplicate check on resource

Vinod Koul (1):
usb: musb: ux500_dma: use dmaengine_xxx() APIs

Vivek Gautam (7):
usb: ehci/ohci-exynos: Fix of_node_put() for child when getting PHYs
usb: dwc3: exynos: Remove local variable for clock from probe
usb: dwc3: exynos: Add provision for suspend clock
usb: dwc3: exynos: Add provision for AXI UpScaler clock on exynos7
phy: exynos5-usbdrd: Add pipe-clk, utmi-clk and itp-clk support
phy: exynos5-usbdrd: Add facility for VBUS-BOOST-5V supply
phy: exynos7-usbdrd: Update dependency for ARCH_EXYNOS

Wonhong Kwon (1):
usb: ehci/ohci-platform: use SIMPLE_DEV_PM_OPS to support hibernation

Yoshihiro Shimoda (9):
usb: renesas_usbhs: rename phy to usb_phy in usbhs_priv
usb: renesas_usbhs: clean up rcar2.c to support a generic PHY
usb: renesas_usbhs: add support for generic PHY
usb: renesas_usbhs: fix the timing of dcp_control_transfer_done
usb: renesas_usbhs: fix usbhs_pipe_clear() for DCP PIPE
usb: renesas_usbhs: change d{0,1}fifo to dfifo array
usb: renesas_usbhs: standardize d{0,1}fifo control
usb: renesas_usbhs: add a new macro for extending DnFIFOs
usb: renesas_usbhs: expand USB-DMAC channels for R-Car Gen2

kbuild test robot (2):
usb: gadget: ss_ep_in_comp_desc can be static
usb: chipidea: fix platform_no_drv_owner.cocci warnings

Documentation/ABI/stable/sysfs-class-udc | 93 +
Documentation/ABI/testing/configfs-usb-gadget-hid | 11 +
Documentation/ABI/testing/configfs-usb-gadget-midi | 12 +
Documentation/devicetree/bindings/ata/marvell.txt | 6 +
.../devicetree/bindings/phy/berlin-sata-phy.txt | 4 +-
.../devicetree/bindings/phy/berlin-usb-phy.txt | 16 +
.../devicetree/bindings/phy/phy-miphy28lp.txt | 128 ++
.../devicetree/bindings/phy/phy-mvebu.txt | 43 +
.../devicetree/bindings/phy/samsung-phy.txt | 6 +
.../devicetree/bindings/usb/ci-hdrc-usb2.txt | 24 +
Documentation/devicetree/bindings/usb/dwc3.txt | 23 +
.../devicetree/bindings/usb/exynos-usb.txt | 6 +-
Documentation/devicetree/bindings/usb/pxa-usb.txt | 22 +
Documentation/devicetree/bindings/usb/usb-ohci.txt | 2 +
Documentation/phy.txt | 60 +-
Documentation/usb/gadget_hid.txt | 7 +
Documentation/usb/usb-serial.txt | 2 +-
arch/arm/boot/dts/am4372.dtsi | 4 +
arch/arm/mach-omap2/twl-common.c | 12 +-
arch/mips/cavium-octeon/octeon-platform.c | 274 ++-
arch/mips/configs/cavium_octeon_defconfig | 3 +
drivers/pci/quirks.c | 20 +
drivers/phy/Kconfig | 23 +-
drivers/phy/Makefile | 3 +
drivers/phy/phy-armada375-usb2.c | 158 ++
drivers/phy/phy-bcm-kona-usb2.c | 2 +-
drivers/phy/phy-berlin-sata.c | 36 +-
drivers/phy/phy-berlin-usb.c | 223 +++
drivers/phy/phy-core.c | 115 +-
drivers/phy/phy-exynos-dp-video.c | 2 +-
drivers/phy/phy-exynos-mipi-video.c | 2 +-
drivers/phy/phy-exynos5-usbdrd.c | 139 +-
drivers/phy/phy-exynos5250-sata.c | 2 +-
drivers/phy/phy-hix5hd2-sata.c | 7 +-
drivers/phy/phy-miphy28lp.c | 1283 +++++++++++++
drivers/phy/phy-miphy365x.c | 7 +-
drivers/phy/phy-mvebu-sata.c | 2 +-
drivers/phy/phy-omap-usb2.c | 16 +-
drivers/phy/phy-qcom-apq8064-sata.c | 3 +-
drivers/phy/phy-qcom-ipq806x-sata.c | 3 +-
drivers/phy/phy-rcar-gen2.c | 2 +-
drivers/phy/phy-samsung-usb2.c | 3 +-
drivers/phy/phy-spear1310-miphy.c | 2 +-
drivers/phy/phy-spear1340-miphy.c | 2 +-
drivers/phy/phy-stih407-usb.c | 2 +-
drivers/phy/phy-stih41x-usb.c | 7 +-
drivers/phy/phy-sun4i-usb.c | 11 +-
drivers/phy/phy-ti-pipe3.c | 2 +-
drivers/phy/phy-twl4030-usb.c | 15 +-
drivers/phy/phy-xgene.c | 2 +-
drivers/pinctrl/pinctrl-tegra-xusb.c | 4 +-
drivers/usb/chipidea/Makefile | 1 +
drivers/usb/chipidea/ci.h | 10 +-
drivers/usb/chipidea/ci_hdrc_imx.c | 45 +-
drivers/usb/chipidea/ci_hdrc_msm.c | 9 +-
drivers/usb/chipidea/ci_hdrc_usb2.c | 115 ++
drivers/usb/chipidea/core.c | 225 ++-
drivers/usb/chipidea/debug.c | 2 +-
drivers/usb/chipidea/host.c | 78 +-
drivers/usb/chipidea/otg_fsm.c | 41 +-
drivers/usb/chipidea/udc.c | 22 +-
drivers/usb/chipidea/usbmisc_imx.c | 6 +-
drivers/usb/class/cdc-acm.c | 17 +-
drivers/usb/class/cdc-acm.h | 1 -
drivers/usb/class/usbtmc.c | 4 +-
drivers/usb/common/usb-otg-fsm.c | 8 +-
drivers/usb/core/hcd.c | 7 +-
drivers/usb/core/hub.c | 18 +-
drivers/usb/dwc2/Kconfig | 68 +-
drivers/usb/dwc2/Makefile | 32 +-
drivers/usb/dwc2/core.c | 10 -
drivers/usb/dwc2/core.h | 197 +-
drivers/usb/dwc2/core_intr.c | 17 +-
drivers/usb/dwc2/gadget.c | 387 ++--
drivers/usb/dwc2/hcd.c | 94 +-
drivers/usb/dwc2/hcd.h | 10 -
drivers/usb/dwc2/pci.c | 7 +
drivers/usb/dwc2/platform.c | 44 +-
drivers/usb/dwc3/Kconfig | 2 +-
drivers/usb/dwc3/core.c | 251 ++-
drivers/usb/dwc3/core.h | 89 +-
drivers/usb/dwc3/dwc3-exynos.c | 44 +-
drivers/usb/dwc3/dwc3-keystone.c | 6 +-
drivers/usb/dwc3/dwc3-omap.c | 20 +-
drivers/usb/dwc3/dwc3-pci.c | 35 +
drivers/usb/dwc3/dwc3-st.c | 2 +-
drivers/usb/dwc3/ep0.c | 26 +-
drivers/usb/dwc3/gadget.c | 68 +-
drivers/usb/dwc3/host.c | 22 +-
drivers/usb/dwc3/platform_data.h | 20 +
drivers/usb/dwc3/trace.h | 20 +-
drivers/usb/gadget/Kconfig | 61 +
drivers/usb/gadget/composite.c | 64 +-
drivers/usb/gadget/configfs.c | 5 +-
drivers/usb/gadget/function/Makefile | 4 +
drivers/usb/gadget/function/f_hid.c | 374 +++-
drivers/usb/gadget/function/f_midi.c | 364 +++-
drivers/usb/gadget/function/f_ncm.c | 3 +
drivers/usb/gadget/function/f_rndis.c | 3 +-
drivers/usb/gadget/function/u_hid.h | 42 +
drivers/usb/gadget/function/u_midi.h | 40 +
drivers/usb/gadget/function/u_uac1.c | 3 -
drivers/usb/gadget/legacy/Kconfig | 2 +
drivers/usb/gadget/legacy/dbgp.c | 26 +-
drivers/usb/gadget/legacy/gmidi.c | 43 +-
drivers/usb/gadget/legacy/hid.c | 79 +-
drivers/usb/gadget/legacy/printer.c | 65 +-
drivers/usb/gadget/udc/Kconfig | 2 +
drivers/usb/gadget/udc/Makefile | 1 +
drivers/usb/gadget/udc/amd5536udc.c | 12 +-
drivers/usb/gadget/udc/at91_udc.c | 89 +-
drivers/usb/gadget/udc/atmel_usba_udc.c | 25 +-
drivers/usb/gadget/udc/bcm63xx_udc.c | 13 +-
drivers/usb/gadget/udc/bdc/Kconfig | 21 +
drivers/usb/gadget/udc/bdc/Makefile | 8 +
drivers/usb/gadget/udc/bdc/bdc.h | 490 +++++
drivers/usb/gadget/udc/bdc/bdc_cmd.c | 376 ++++
drivers/usb/gadget/udc/bdc/bdc_cmd.h | 29 +
drivers/usb/gadget/udc/bdc/bdc_core.c | 533 ++++++
drivers/usb/gadget/udc/bdc/bdc_dbg.c | 123 ++
drivers/usb/gadget/udc/bdc/bdc_dbg.h | 37 +
drivers/usb/gadget/udc/bdc/bdc_ep.c | 2024 ++++++++++++++++++++
drivers/usb/gadget/udc/bdc/bdc_ep.h | 22 +
drivers/usb/gadget/udc/bdc/bdc_pci.c | 132 ++
drivers/usb/gadget/udc/bdc/bdc_udc.c | 587 ++++++
drivers/usb/gadget/udc/dummy_hcd.c | 36 +-
drivers/usb/gadget/udc/fotg210-udc.c | 3 +-
drivers/usb/gadget/udc/fsl_qe_udc.c | 13 +-
drivers/usb/gadget/udc/fsl_udc_core.c | 19 +-
drivers/usb/gadget/udc/fusb300_udc.c | 3 +-
drivers/usb/gadget/udc/goku_udc.c | 6 +-
drivers/usb/gadget/udc/gr_udc.c | 8 +-
drivers/usb/gadget/udc/lpc32xx_udc.c | 11 +-
drivers/usb/gadget/udc/m66592-udc.c | 5 +-
drivers/usb/gadget/udc/mv_u3d_core.c | 5 +-
drivers/usb/gadget/udc/mv_udc_core.c | 32 +-
drivers/usb/gadget/udc/net2272.c | 66 +-
drivers/usb/gadget/udc/net2280.c | 65 +-
drivers/usb/gadget/udc/omap_udc.c | 6 +-
drivers/usb/gadget/udc/pch_udc.c | 11 +-
drivers/usb/gadget/udc/pxa25x_udc.c | 43 +-
drivers/usb/gadget/udc/pxa27x_udc.c | 152 +-
drivers/usb/gadget/udc/pxa27x_udc.h | 6 +-
drivers/usb/gadget/udc/r8a66597-udc.c | 10 +-
drivers/usb/gadget/udc/s3c-hsudc.c | 16 +-
drivers/usb/gadget/udc/s3c2410_udc.c | 6 +-
drivers/usb/gadget/udc/udc-core.c | 28 +-
drivers/usb/gadget/udc/udc-xilinx.c | 3 +-
drivers/usb/host/Kconfig | 18 +-
drivers/usb/host/Makefile | 1 -
drivers/usb/host/ehci-atmel.c | 13 +-
drivers/usb/host/ehci-exynos.c | 12 +-
drivers/usb/host/ehci-fsl.c | 12 +-
drivers/usb/host/ehci-hcd.c | 14 +-
drivers/usb/host/ehci-hub.c | 45 +-
drivers/usb/host/ehci-msm.c | 10 +-
drivers/usb/host/ehci-mv.c | 13 -
drivers/usb/host/ehci-mxc.c | 11 +-
drivers/usb/host/ehci-octeon.c | 188 --
drivers/usb/host/ehci-orion.c | 14 +-
drivers/usb/host/ehci-platform.c | 27 +-
drivers/usb/host/ehci-sead3.c | 5 +-
drivers/usb/host/ehci-sh.c | 16 +-
drivers/usb/host/ehci-spear.c | 9 +-
drivers/usb/host/ehci-tegra.c | 11 +-
drivers/usb/host/ehci-w90x900.c | 17 +-
drivers/usb/host/ehci.h | 2 +
drivers/usb/host/fotg210.h | 62 +-
drivers/usb/host/fusbh200.h | 62 +-
drivers/usb/host/imx21-hcd.c | 6 +-
drivers/usb/host/octeon2-common.c | 200 --
drivers/usb/host/ohci-at91.c | 15 +-
drivers/usb/host/ohci-da8xx.c | 7 +-
drivers/usb/host/ohci-exynos.c | 11 +-
drivers/usb/host/ohci-hcd.c | 5 -
drivers/usb/host/ohci-jz4740.c | 13 +-
drivers/usb/host/ohci-octeon.c | 202 --
drivers/usb/host/ohci-omap.c | 2 +-
drivers/usb/host/ohci-platform.c | 53 +-
drivers/usb/host/ohci-pxa27x.c | 11 +-
drivers/usb/host/ohci-spear.c | 11 +-
drivers/usb/host/ohci.h | 19 +-
drivers/usb/host/oxu210hp-hcd.c | 1 -
drivers/usb/host/pci-quirks.c | 12 +-
drivers/usb/host/uhci-platform.c | 6 +-
drivers/usb/host/xhci-plat.c | 10 +-
drivers/usb/host/xhci-ring.c | 113 +-
drivers/usb/host/xhci.c | 7 +-
drivers/usb/host/xhci.h | 4 +-
drivers/usb/misc/adutux.c | 5 -
drivers/usb/misc/sisusbvga/sisusb.c | 3 +-
drivers/usb/misc/usb3503.c | 8 +-
drivers/usb/misc/yurex.c | 6 +-
drivers/usb/musb/Kconfig | 5 +-
drivers/usb/musb/am35x.c | 32 +-
drivers/usb/musb/blackfin.c | 74 +-
drivers/usb/musb/da8xx.c | 30 +-
drivers/usb/musb/davinci.c | 22 +-
drivers/usb/musb/jz4740.c | 2 +
drivers/usb/musb/musb_core.c | 335 +++-
drivers/usb/musb/musb_core.h | 87 +-
drivers/usb/musb/musb_cppi41.c | 10 +-
drivers/usb/musb/musb_debugfs.c | 57 +-
drivers/usb/musb/musb_dsps.c | 37 +-
drivers/usb/musb/musb_gadget.c | 58 +-
drivers/usb/musb/musb_host.c | 8 +-
drivers/usb/musb/musb_io.h | 106 +-
drivers/usb/musb/musb_regs.h | 26 -
drivers/usb/musb/musb_virthub.c | 23 +-
drivers/usb/musb/musbhsdma.c | 7 +-
drivers/usb/musb/omap2430.c | 52 +-
drivers/usb/musb/tusb6010.c | 102 +-
drivers/usb/musb/ux500.c | 16 +-
drivers/usb/musb/ux500_dma.c | 11 +-
drivers/usb/phy/phy-ab8500-usb.c | 33 +-
drivers/usb/phy/phy-am335x-control.c | 4 +-
drivers/usb/phy/phy-fsl-usb.c | 27 +-
drivers/usb/phy/phy-fsl-usb.h | 2 +-
drivers/usb/phy/phy-generic.c | 8 +-
drivers/usb/phy/phy-gpio-vbus-usb.c | 16 +-
drivers/usb/phy/phy-isp1301-omap.c | 104 +-
drivers/usb/phy/phy-msm-usb.c | 107 +-
drivers/usb/phy/phy-mv-usb.c | 56 +-
drivers/usb/phy/phy-mxs-usb.c | 4 +-
drivers/usb/phy/phy-rcar-gen2-usb.c | 4 +-
drivers/usb/phy/phy-rcar-usb.c | 12 +-
drivers/usb/phy/phy-tahvo.c | 34 +-
drivers/usb/phy/phy-tegra-usb.c | 9 +-
drivers/usb/phy/phy-ulpi.c | 6 +-
drivers/usb/phy/phy.c | 16 +-
drivers/usb/renesas_usbhs/common.c | 14 +-
drivers/usb/renesas_usbhs/common.h | 7 +-
drivers/usb/renesas_usbhs/fifo.c | 111 +-
drivers/usb/renesas_usbhs/fifo.h | 10 +-
drivers/usb/renesas_usbhs/mod_gadget.c | 41 +-
drivers/usb/renesas_usbhs/mod_host.c | 2 +-
drivers/usb/renesas_usbhs/pipe.c | 8 +-
drivers/usb/renesas_usbhs/rcar2.c | 73 +-
drivers/usb/serial/Kconfig | 5 +-
drivers/usb/serial/keyspan_pda.c | 16 +-
drivers/usb/serial/kobil_sct.c | 2 +-
drivers/usb/serial/mos7720.c | 8 +-
drivers/usb/serial/mos7840.c | 4 +-
drivers/usb/serial/qcserial.c | 33 +
drivers/usb/serial/usb-serial-simple.c | 10 +
drivers/usb/storage/debug.c | 7 +-
drivers/usb/storage/debug.h | 10 +-
drivers/usb/storage/initializers.c | 3 +-
drivers/usb/storage/transport.c | 17 +-
drivers/usb/storage/uas.c | 64 +-
drivers/usb/storage/usb.c | 36 +-
drivers/usb/usbip/stub_dev.c | 26 +-
drivers/usb/usbip/vhci_hcd.c | 9 +-
drivers/usb/wusbcore/dev-sysfs.c | 2 +-
drivers/usb/wusbcore/security.c | 8 +-
drivers/uwb/rsv.c | 4 +-
include/dt-bindings/phy/phy.h | 19 +
include/linux/i2c/twl.h | 2 -
include/linux/pci_ids.h | 1 +
include/linux/phy/phy.h | 52 +-
include/linux/platform_data/dwc3-exynos.h | 24 -
include/linux/usb/chipidea.h | 5 +-
include/linux/usb/composite.h | 7 +
include/linux/usb/ehci-dbgp.h | 83 +
include/linux/usb/ehci_def.h | 65 +-
include/linux/usb/gadget.h | 5 +-
include/linux/usb/hcd.h | 3 +
include/linux/usb/otg.h | 7 +-
include/linux/usb/phy.h | 6 +-
include/linux/usb/renesas_usbhs.h | 4 +
tools/usb/usbip/src/usbipd.c | 2 -
271 files changed, 11292 insertions(+), 3548 deletions(-)
create mode 100644 Documentation/ABI/stable/sysfs-class-udc
create mode 100644 Documentation/ABI/testing/configfs-usb-gadget-hid
create mode 100644 Documentation/ABI/testing/configfs-usb-gadget-midi
create mode 100644 Documentation/devicetree/bindings/phy/berlin-usb-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
create mode 100644 Documentation/devicetree/bindings/phy/phy-mvebu.txt
create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
create mode 100644 drivers/phy/phy-armada375-usb2.c
create mode 100644 drivers/phy/phy-berlin-usb.c
create mode 100644 drivers/phy/phy-miphy28lp.c
create mode 100644 drivers/usb/chipidea/ci_hdrc_usb2.c
create mode 100644 drivers/usb/gadget/function/u_hid.h
create mode 100644 drivers/usb/gadget/function/u_midi.h
create mode 100644 drivers/usb/gadget/udc/bdc/Kconfig
create mode 100644 drivers/usb/gadget/udc/bdc/Makefile
create mode 100644 drivers/usb/gadget/udc/bdc/bdc.h
create mode 100644 drivers/usb/gadget/udc/bdc/bdc_cmd.c
create mode 100644 drivers/usb/gadget/udc/bdc/bdc_cmd.h
create mode 100644 drivers/usb/gadget/udc/bdc/bdc_core.c
create mode 100644 drivers/usb/gadget/udc/bdc/bdc_dbg.c
create mode 100644 drivers/usb/gadget/udc/bdc/bdc_dbg.h
create mode 100644 drivers/usb/gadget/udc/bdc/bdc_ep.c
create mode 100644 drivers/usb/gadget/udc/bdc/bdc_ep.h
create mode 100644 drivers/usb/gadget/udc/bdc/bdc_pci.c
create mode 100644 drivers/usb/gadget/udc/bdc/bdc_udc.c
delete mode 100644 drivers/usb/host/ehci-octeon.c
delete mode 100644 drivers/usb/host/octeon2-common.c
delete mode 100644 drivers/usb/host/ohci-octeon.c
create mode 100644 include/dt-bindings/phy/phy.h
delete mode 100644 include/linux/platform_data/dwc3-exynos.h
create mode 100644 include/linux/usb/ehci-dbgp.h


\
 
 \ /
  Last update: 2014-12-15 00:21    [W:0.068 / U:1.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site